ORIGINAL / FACTORY Diesel 3.0 TDI 240hp

Audi A5 3.0 TDI CR 2007 Turbo-Diesel 176.5KW

Audi A5 3.0 TDI CR 2007 Turbo-Diesel 176.5KW Bosch 8K0907401 510328 Original 8K0907401
060120180240 10002000300040005000 240 HP +0 500 Nm +0 HP Nm RPM 0120240360480
Stock Original / Factory HP / Nm projection
240 HP Factory calibration
Stock backup file — 500 Nm · Diesel

Calibrated ECU file for (SW 510328). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #404 · Gains DB
MATCHED ENGINE 3.0 TDI 240hp CAPA 3L Diesel Factory
060120180240 10002000300040005000 240 HP +0 500 Nm +0 HP Nm RPM 0120240360480
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Audi
Vehicle model A5
Model year 2007
Displacement 3.0 L
Fuel / Induction Turbo Diesel
Factory power 176.5 kW (240 HP)
ECU manufacturer Bosch
ECU hardware 8K0907401
ECU software 510328
Calibration stage Original (Factory)
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

About this calibration file

This is the factory (original) ECU calibration for the 2007 Audi A5 3.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a Bosch ECU with hardware number 8K0907401 and software version 510328. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 8K0907401 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Audi dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.
ECU SpecificationFactory values
Vehicle Audi A5 3.0 TDI CR 2007 Turbo-Diesel 176.5KW
Engine power 176.5 kW (~240 HP)
Fuel type Turbo-diesel
ECU brand Bosch
ECU hardware 8K0907401
Bosch software number 510328 ( 1037510328 )
Tuning type Original
Read method / notes 510328

This product contains a complete original ECU backup (stock file) for Audi A5 3.0 TDI CR 2007 Turbo-Diesel 176.5KW with Bosch 8K0907401 (Bosch software number 510328 ( 1037510328 )). This original file corresponds to a factory engine output of approximately 176.5 kW (~240 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 8K0907401, 510328 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint423ED303 BB65F58D F8B561E1 D571637D 433B8047 1F344347 FD7A1AB0 66366594

Same engine — other calibrations

Alternative stages for the same ECU: Audi family