Original file
Original / Factory · Petrol · 3.0 V6 220hp
Audi A4 3.0 L original file Bosch HW 0261207839 · 8E0909559H · SW 363373
Audi A4 3.0 L Petrol 161.8 kW (220 HP) OriginalPetrol, 161.8 kW (220 hp)
220 HP Factory calibration Stock backup file, 300 Nm, Petrol
Calibrated ECU file for 0261207839 (SW 363373). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.0 V6 220hp, ASN, 3L, Petrol. Engine #289 in our gains database.
- Power
- 220 HPfactory calibration
- Torque
- 300 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207839 and software 363373.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A4 |
| Displacement | 3.0 L |
| Fuel / Induction | Petrol |
| Factory power | 161.8 kW (220 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 8E0909559H |
| ECU hardware | 0261207839 |
| ECU software | 363373 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2976 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 82,5 X 92,8 mm |
| OEM engine code | ASN |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 220 HP | 300 Nm | — | — |
| Stage 1 | 235 HP | 320 Nm | +15 (6.8%) | +20 |
| Stage 2 | 249 HP | 336 Nm | +29 (13.2%) | +36 |
| Stage 3 | 363 HP | 465 Nm | +143 (65%) | +165 |
| Stage 4 | 429 HP | 555 Nm | +209 (95%) | +255 |
About this calibration file
This is the factory (original) ECU calibration for the Audi A4 3.0L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261207839 and software version 363373. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207839 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi A4 3.0 L Benzin 161.8KW with Bosch 0261207839 and software ID 8E0909559H (Bosch software number 363373 ( 1037363373 )). This original file corresponds to a factory engine output of approximately 161.8 kW (~220 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207839, 8E0909559H, 363373 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
85DA38BB 492852AE 1BD18DFF 3A1B4EBD CA7A9163 9AACB6DF 72083A57 543D948F