Stage 2
Stage 2 · Diesel · 1.9 TDI 130hp
Audi A4 1.9 TDI Stage 2 file Bosch HW 0281010729 · 038906019FP · SW 362614
Audi A4 1.9 TDI Turbo Diesel 95.6 kW (130 HP) Stage 22001, Turbo diesel, 95.6 kW (130 hp)
130 → 185 HP +55 HP +146 Nm 42% more power
Calibrated ECU file for 0281010729 (SW 362614). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.9 TDI 130hp, AWX, 1.9L, Diesel. Engine #283 in our gains database.
- Power
- 185 HP+55 HP from 130
- Torque
- 456 Nm+146 Nm from 310
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010729 and software 362614.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A4 |
| Model year | 2001 |
| Displacement | 1.9 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 95.6 kW (130 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010729 |
| ECU software | 362614 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1896 CC |
| Compression ratio | 19,0 : 1 |
| Bore × Stroke | 79,5 X 95,5 mm |
| OEM engine code | AWX |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 130 HP | 310 Nm | — | — |
| Stage 1 | 170 HP | 390 Nm | +40 (30.8%) | +80 |
| Stage 2 | 185 HP | 456 Nm | +55 (42.3%) | +146 |
| Stage 3 | 195 HP | 481 Nm | +65 (50%) | +171 |
| Stage 4 | 234 HP | 574 Nm | +104 (80%) | +264 |
About this calibration file
The Stage 2 calibration for the 2001 Audi A4 1.9L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281010729 and software version 362614. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 185 HP and 456 Nm at the crank — a gain of +55 HP (42%) and +146 Nm over the factory 130 HP / 310 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010729 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for Audi A4 1.9 TDI 2001 Turbodiesel 95.6KW with Bosch 0281010729 and software ID 038906019FP (Bosch software number 362614 ( 1037362614 )). The base stock vehicle for this calibration has a factory output of around 95.6 kW (~130 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010729, 038906019FP, 362614 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
D2F0EB7A FEEBEE7D D9BDA8A8 FDEA86B1 C616E8EE 4457D50C 6ABE13CA 5C4D7D80