STAGE 3 Diesel 1.9 TDI 100hp

Audi A4 1.9 TDI Turbo Diesel 66.2 kW (90 HP) Stage 3

04080120160 10002000300040005000 154 HP +54 372 Nm +132 HP Nm RPM 0100200300400
Stock Stage 3 HP / Nm projection
100 154 HP
+54 HP +132 Nm 54% more power

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #311 · Gains DB TYPICAL PROJECTION
MATCHED ENGINE 1.9 TDI 100hp AVB 1.9L Diesel Stage 3
04080120160 10002000300040005000 154 HP +54 372 Nm +132 HP Nm RPM 0100200300400
Stock Stage 3 HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Stage 3 · Diesel
Hardware
  • Hybrid or larger turbocharger
  • Upgraded injectors (matched flow rate)
  • Front-mount intercooler upgrade
  • Sport / decat downpipe + free-flow exhaust
  • High-flow air intake
  • Uprated clutch (manual gearbox)
Software / Calibration
  • Custom map dialled to the installed turbo, injector and intercooler spec
  • Boost, fuelling, ignition / injection timing rebuilt around the new hardware
  • All safety limits (knock, EGT, lambda, rail) re-tuned to match
  • Drivability and torque-by-gear shaped to match the hardware

Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build — typical projection above is a guide, final dyno depends on installed hardware.

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Audi
Vehicle model A4
Model year 2001
Displacement 1.9 L
Fuel / Induction Turbo Diesel
Factory power 66.2 kW (90 HP)
ECU manufacturer Bosch
ECU hardware 0281010202
Calibration stage Stage 3
Cylinder capacity 1896 CC
Compression ratio 19,0 : 1
Bore × Stroke 79,5 X 95,5 mm
OEM engine code AVB
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine1.9 TDI 100hp CodeAVB Displacement1.9L Capacity1896 CC Compression19,0 : 1 Bore × Stroke79,5 X 95,5 mm FuelDiesel Engine ID#311
Stage Power Torque Δ HP Δ Nm
Original / Factory 100 HP 240 Nm — —
Stage 1 140 HP 320 Nm +40 (40%) +80
Stage 2 147 HP 333 Nm +47 (47%) +93
Stage 3 154 HP 372 Nm +54 (54%) +132
Stage 4 180 HP 444 Nm +80 (80%) +204
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

The Stage 3 calibration for the 2001 Audi A4 1.9L Turbo Diesel targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.

This file matches a Bosch ECU with hardware number 0281010202. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

Projected output on a healthy, stock-hardware example of this engine: 154 HP and 372 Nm at the crank — a gain of +54 HP (54%) and +132 Nm over the factory 100 HP / 240 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 0281010202 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

This stage targets a built setup — hybrid/larger turbo, upgraded injectors, high-flow fuelling, and in some cases upgraded transmission/clutch. Running the file on stock hardware is not supported and can cause detonation, EGT spikes or overboost fuel cuts.

Re-flashing the ECU leaves a flag that a franchised Audi dealer can detect with their diagnostic tool. Most markets treat this as a basis to deny powertrain warranty claims that the modification could have caused. Emissions-sensitive components (DPF, EGR, SCR) remain fully functional with this calibration — we do not remove, disable or alter any emissions hardware.

The power and torque numbers on this page are healthy-engine crank figures. On a well-maintained 2001 Audi A4 running a known-good fuel brand, you should see a clearly perceptible increase in mid-range pull — typically from 1,800 to 4,000 rpm on diesel, 2,500 to 6,000 rpm on petrol — along with a shorter 80-to-120 km/h in-gear time. Thermal performance and fuel consumption depend on how you drive post-tune.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a calibrated Stage3 tuning file for Audi A4 1.9 TDI 2001 Turbodiesel 66.2KW with Bosch 0281010202 and software ID 038906012AJ (Bosch software number 352625 ( 1037352625 )). The base stock vehicle for this calibration has a factory output of around 66.2 kW (~90 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010202, 038906012AJ, 352625 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint4A2FD6DF 0F9F0187 BF9EDB94 FF283A90 428CD9F2 0B44F297 48519E41 FD84D3CF

Same engine — other calibrations

Alternative stages for the same ECU: Audi family