Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
Audi A4 B6
  1. Home
  2. I need a file
  3. ECU files
  4. Audi
  5. Audi A4

Instant download

Audi A4 1.8 T Stage 1 file Bosch ME7.5 HW 0261208501 · 8E0909518AT · SW 369013

2003 · Turbo petrol · 190 hp (140 kW)

Launch control, anti-lag, rolling anti-lag and no-lift shift for Bosch ME7

This function is available for this file: set your values here and download the file built on this Stage 1 file. Sign in to make it, or join the membership and make files from any read we hold.

About the tool

Beta. These functions are new; if a file you make does not do what this page says, tell us and we correct it free.

Share WhatsApp Facebook

Audi A4 B6 2000–2006

Dyno sheet

Power
210 hp +20
Torque
340 Nm +105
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.0075100150200225300300400200030004000500060007000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 1.8 T. Results depend on the car's condition, fuel and parts.

Power
190 hp 140 kW
ECU
Bosch ME7.5
Engine
1.8 T Turbo petrol · 1,781 cc · 4 cyl
File
1 MB BIN, ready to write

Bosch ME7.5 on the Audi A4 1.8 T

Software and hardware

Hardware
0261208501 Bosch's number for the ECU itself, on its label printed 0 261 208 501
Part number
8E0909518AT Audi's part number for this ECU, printed 8E0 909 518 AT
Software
369013 (1037369013) The software inside: your read must show this number

Check your read against this file

How the Bosch ME7.5 is read: OBD and Bench

  • OBD
  • Bench
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • Byteshooter

Older tools

  • KESS V2
  • MPPS

Built on request for the Audi A4 1.8 T

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Pops and bangs
  • Anti-lag

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261208501, part number 8E0909518AT and software 369013
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261208501, part number 8E0909518AT and software 369013 (1037369013), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the 2003 Audi A4 1.8 T (140 kW, 190 hp), for its Bosch ME7.5 ECU with hardware 0261208501, part number 8E0909518AT and software 369013 (1037369013). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 1.8 T raises the boost, sets the ignition and the fuelling to match and lifts the torque limits, within what the standard turbo and fuel pump hold. It wants the fuel octane the car was made for, or better.

The Audi A4 1.8 T carries the 1.8 T engine, 190 hp and 235 Nm from the factory. On this engine, Stage 1 usually gives about 210 hp and 340 Nm (+20 hp, +105 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 369013 of the Audi A4 1.8 T we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch ME7.5 ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261208501 is the number on the Bosch ECU's label. Software 369013 (1037369013) is the calibration inside it: a read with hardware 0261208501 and another software number needs a different file. Part number 8E0909518AT is the car maker's number for this ECU.

Questions

Which ECU does this Audi A4 1.8 T Stage 1 file fit?

A Bosch ME7.5 ECU with hardware 0261208501, part number 8E0909518AT and software 369013 (1037369013). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ME7.5 read and written?

Over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the Audi A4 1.8 T?

Usually about 210 hp and 340 Nm against 190 hp and 235 Nm stock (+20 hp, +105 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch ME7.5 file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read