Stage 1
Stage 1 · Diesel · 2.0 TDI 140hp
Audi A3 2.0 TDI CR Stage 1 file Bosch · 03L906022BQ · SW 508343
Audi A3 2.0 TDI CR Turbo Diesel 103 kW (140 HP) Stage 12008, Turbo diesel, 103 kW (140 hp)
140 → 175 HP +35 HP +75 Nm 25% more power
Calibrated ECU file for 03L906022BQ (SW 508343). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TDI 140hp, BKD, 2L, Diesel. Engine #217 in our gains database.
- Power
- 175 HP+35 HP from 140
- Torque
- 395 Nm+75 Nm from 320
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03L906022BQ and software 508343.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A3 |
| Model year | 2008 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 103 kW (140 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4L0907401A |
| ECU hardware | 03L906022BQ |
| ECU software | 508343 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1968 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | BKD |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 140 HP | 320 Nm | — | — |
| Stage 1 | 175 HP | 395 Nm | +35 (25%) | +75 |
| Stage 2 | 190 HP | 410 Nm | +50 (35.7%) | +90 |
| Stage 3 | 220 HP | 450 Nm | +80 (57.1%) | +130 |
| Stage 4 | 252 HP | 592 Nm | +112 (80%) | +272 |
About this calibration file
The Stage 1 calibration for the 2008 Audi A3 2.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 03L906022BQ and software version 508343. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 175 HP and 395 Nm at the crank — a gain of +35 HP (25%) and +75 Nm over the factory 140 HP / 320 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
03L906022BQ (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Audi A3 2.0 TDI CR 2008 Turbo-Diesel 103KW with Bosch 03L906022BQ and software ID 4L0907401A (Bosch software number 508343 ( 1037508343 )). The base stock vehicle for this calibration has a factory output of around 103 kW (~140 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 03L906022BQ, 4L0907401A, 508343 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
0FE82FF7 AB60EB7D AAD96DD7 DF0D80AD 06ED1183 8C58BEC6 2337F3E4 6DA52FCB