Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
Audi A3 8P
  1. Home
  2. I need a file
  3. ECU files
  4. Audi
  5. Audi A3

Instant download

Audi A3 1.6 Stage 1 file Siemens HW 5WP40344 · 06A906033GQ

2007 · Petrol · 102 hp (75 kW)

Share WhatsApp Facebook

Audi A3 8P 2003–2008

Dyno sheet

Power
112 hp +10
Torque
165 Nm +17
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.003850751001131501502001000200030004000500060007000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 1.6i 8v. Results depend on the car's condition, fuel and parts.

Power
102 hp 75 kW
ECU
Siemens
Engine
1.6i 8v Petrol · 1,595 cc · 4 cyl
File
512 KB BIN, ready to write

Siemens on the Audi A3 1.6

Software and hardware

Hardware
5WP40344 Siemens's number for the ECU itself, on its label
Part number
06A906033GQ Audi's part number for this ECU, printed 06A 906 033 GQ

Check your read against this file

How the Siemens is read: OBD and Bench

  • OBD
  • Bench
  • CMD Flash
  • New Genius

Older tools

  • KESS V2

Built on request for the Audi A3 1.6

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Start/stop off
  • Pops and bangs

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 5WP40344 and part number 06A906033GQ
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 5WP40344 and part number 06A906033GQ, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the 2007 Audi A3 1.6 (75 kW, 102 hp), for its Siemens ECU with hardware 5WP40344 and part number 06A906033GQ. Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 1.6i 8v refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.

The Audi A3 1.6 carries the 1.6i 8v engine, 102 hp and 148 Nm from the factory. On this engine, Stage 1 usually gives about 112 hp and 165 Nm (+10 hp, +17 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the Audi A3 1.6 we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Siemens ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 1.6i 8v engine with the same ECU is fitted to the Audi A3 8P FL and Volkswagen Touran I: their file can be the same, so check the software number of your read.

Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 5WP40344 is the number on the Siemens ECU's label. Part number 06A906033GQ is the car maker's number for this ECU.

Questions

Which ECU does this Audi A3 1.6 Stage 1 file fit?

A Siemens ECU with hardware 5WP40344 and part number 06A906033GQ. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Siemens ECU read and written?

Over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the Audi A3 1.6?

Usually about 112 hp and 165 Nm against 102 hp and 148 Nm stock (+10 hp, +17 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Siemens ECU file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read