Stage 1
Stage 1 · Diesel · 1.2 TDI 60hp
Audi A2 1.2 TDI Stage 1 file Bosch HW 0281010227 · 045906019D · SW 360790
Audi A2 1.2 TDI Turbo Diesel 44.9 kW (61 HP) Stage 12000, Turbo diesel, 44.9 kW (61 hp)
60 → 72 HP +12 HP +31 Nm 20% more power
Calibrated ECU file for 0281010227 (SW 360790). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.2 TDI 60hp, ANY, 1.2L, Diesel. Engine #198 in our gains database.
- Power
- 72 HP+12 HP from 60
- Torque
- 171 Nm+31 Nm from 140
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010227 and software 360790.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A2 |
| Model year | 2000 |
| Displacement | 1.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 44.9 kW (61 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010227 |
| ECU software | 360790 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1191 CC |
| Compression ratio | 19,5 : 1 |
| Bore × Stroke | 76,5 X 86,4 mm |
| OEM engine code | ANY |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 60 HP | 140 Nm | — | — |
| Stage 1 | 72 HP | 171 Nm | +12 (20%) | +31 |
| Stage 2 | 76 HP | 178 Nm | +16 (26.7%) | +38 |
| Stage 3 | 90 HP | 217 Nm | +30 (50%) | +77 |
| Stage 4 | 108 HP | 259 Nm | +48 (80%) | +119 |
About this calibration file
The Stage 1 calibration for the 2000 Audi A2 1.2L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281010227 and software version 360790. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 72 HP and 171 Nm at the crank — a gain of +12 HP (20%) and +31 Nm over the factory 60 HP / 140 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010227 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Audi A2 1.2 TDI 2000 Turbodiesel 44.9KW with Bosch 0281010227 and software ID 045906019D (Bosch software number 360790 ( 1037360790 )). The base stock vehicle for this calibration has a factory output of around 44.9 kW (~61 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010227, 045906019D, 360790 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
CAA89C60 512F2763 D51558D3 55E991FD A5D003F2 40B173EB 6808D27B B7AB05DB