Original file
Original / Factory · Diesel · 1.3 JTDM 95hp
Alfa Mito 1.3 JTD 16V original file Marelli
Alfa Romeo Mito 1.3 JTD 16V Turbo Diesel 69.9 kW (95 HP) Marelli 51892330 Original2011, Turbo diesel, 69.9 kW (95 hp)
95 HP Factory calibration Stock backup file, 200 Nm, Diesel
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.3 JTDM 95hp, 199B1000, 1.2L, Diesel. Engine #94 in our gains database.
- Power
- 95 HPfactory calibration
- Torque
- 200 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 51892330.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Alfa Romeo |
|---|---|
| Vehicle model | Mito |
| Model year | 2011 |
| Displacement | 1.3 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 69.9 kW (95 HP) |
| ECU manufacturer | Magneti Marelli |
| ECU hardware | 51892330 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1248 CC |
| Compression ratio | 16,8 : 1 |
| Bore × Stroke | 69,6 X 82,0 mm |
| OEM engine code | 199B1000 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 95 HP | 200 Nm | — | — |
| Stage 1 | 115 HP | 240 Nm | +20 (21.1%) | +40 |
| Stage 2 | 121 HP | 250 Nm | +26 (27.4%) | +50 |
| Stage 3 | 143 HP | 310 Nm | +48 (50.5%) | +110 |
| Stage 4 | 171 HP | 370 Nm | +76 (80%) | +170 |
About this calibration file
This is the factory (original) ECU calibration for the 2011 Alfa Romeo Mito 1.3L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Magneti Marelli ECU with hardware number 51892330. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
51892330 (Magneti Marelli) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Alfa Mito 1.3 JTD 16V 2011 Turbo-Diesel 69.9KW with Marelli 51892330. This original file corresponds to a factory engine output of approximately 69.9 kW (~95 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 51892330. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
48853239 E1D785B9 32A1D1F6 57EB86FA 5DDF0453 09CC4D17 5DF0C8C5 6D21CCEC