Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
Alfa Romeo 147 2000 - 2010
  1. Home
  2. I need a file
  3. ECU files
  4. Alfa Romeo
  5. Alfa Romeo 147

Instant download

Alfa 147 1.9 JTD 16V original file Bosch EDC16C8 HW 0281011455 · SW 370596

2004 · Turbo diesel · 140 hp (103 kW)

Share WhatsApp Facebook

Alfa Romeo 147 2000 - 2010 2000–2010

Dyno sheet

Power
140 hp
Torque
305 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00501501003001504502006001000200030004000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.9 JTD. Results depend on the car's condition, fuel and parts.

Power
140 hp 103 kW
ECU
Bosch EDC16C8
Engine
1.9 JTD Turbo diesel
File
1 MB BIN, ready to write

Bosch EDC16C8 on the Alfa 147 1.9 JTD 16V

Software and hardware

Hardware
0281011455 Bosch's number for the ECU itself, on its label printed 0 281 011 455
Software
370596 (1037370596) The software inside: your read must show this number

Check your read against this file

How the Bosch EDC16C8 is read: OBD and Bench

  • OBD
  • Bench
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • Byteshooter
  • Bitbox

Older tools

  • KESS V2
  • MPPS
  • Trasdata
  • MAGPro2

Built on request for the Alfa 147 1.9 JTD 16V

  • DPF off
  • EGR off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0281011455 and software 370596
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0281011455 and software 370596 (1037370596), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2004 Alfa 147 1.9 JTD 16V (103 kW, 140 hp), for its Bosch EDC16C8 ECU with hardware 0281011455 and software 370596 (1037370596). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The Alfa 147 1.9 JTD 16V carries the 1.9 JTD engine, 140 hp and 305 Nm from the factory. On this engine, Stage 1 usually gives about 175 hp and 380 Nm (+35 hp, +75 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 370596 of the Alfa 147 1.9 JTD 16V we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch EDC16C8 ECU in this car is read and written over OBD and on the bench, with tools such as MagicMotorsport FLEX, CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0281011455 is the number on the Bosch ECU's label. Software 370596 (1037370596) is the calibration inside it: a read with hardware 0281011455 and another software number needs a different file.

Questions

Which ECU does this Alfa 147 1.9 JTD 16V original file fit?

A Bosch EDC16C8 ECU with hardware 0281011455 and software 370596 (1037370596). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch EDC16C8 read and written?

Over OBD and on the bench, with tools such as MagicMotorsport FLEX, CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the Alfa 147 1.9 JTD 16V?

Usually about 175 hp and 380 Nm against 140 hp and 305 Nm stock (+35 hp, +75 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Bosch EDC16C8 file?

Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read