Instant download
VW Golf 3.2 R32 Stage 3 file Bosch ME7.1.1 HW 0261207884 · 022906032CN · SW 366355
2001 · Petrol · 250 hp (184 kW)
Choose your file
Launch control, anti-lag, rolling anti-lag and no-lift shift for Bosch ME7
This function is available for this file: set your values here and download the file built on this Stage 3 file. Sign in to make it, or join the membership and make files from any read we hold.
Beta. These functions are new; if a file you make does not do what this page says, tell us and we correct it free.
Dyno sheet
- Power
- 250 hp
- Torque
- 320 Nm
Typical crank figures for a healthy 3.2 R32. Results depend on the car's condition, fuel and parts.
- Power
- 250 hp 184 kW
- ECU
- Bosch ME7.1.1
- Engine
- 3.2 R32 Petrol · 3,200 cc · 6 cyl
- File
- 1 MB BIN, ready to write
Bosch ME7.1.1 on the VW Golf 3.2 R32
Software and hardware
- Hardware
- 0261207884 Bosch's number for the ECU itself, on its label printed 0 261 207 884
- Part number
- 022906032CN Volkswagen's part number for this ECU, printed 022 906 032 CN
- Software
- 366355 (1037366355) The software inside: your read must show this number
How the Bosch ME7.1.1 is read: OBD and Bench
Older tools
Built on request for the VW Golf 3.2 R32
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261207884, part number 022906032CN and software 366355
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261207884, part number 022906032CN and software 366355 (1037366355), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 3 file is
This is a Stage 3 tune of the factory calibration of the 2001 VW Golf 3.2 R32 (184 kW, 250 hp), for its Bosch ME7.1.1 ECU with hardware 0261207884, part number 022906032CN and software 366355 (1037366355). Stage 3 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.
Stage 3 on the 3.2 R32 is written for a built engine: a bigger turbo, injectors and fuel supply matched to it, and supporting parts. If your build differs, send us the list and we match the file to it.
The VW Golf 3.2 R32 carries the 3.2 R32 engine, 250 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 272 hp and 345 Nm (+22 hp, +25 Nm); Stage 2 usually gives about 280 hp and 365 Nm (+30 hp, +45 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 366355 of the VW Golf 3.2 R32 we sell the original, Stage 1, Stage 2 and Stage 3. Stage 1 and Stage 2 each come in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch ME7.1.1 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 3.2 R32 engine with the same ECU is fitted to the Audi A3 8P, Audi TT 8J, Porsche Cayenne 955, Volkswagen Eos and Volkswagen Passat B6: their file can be the same, so check the software number of your read.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261207884 is the number on the Bosch ECU's label. Software 366355 (1037366355) is the calibration inside it: a read with hardware 0261207884 and another software number needs a different file. Part number 022906032CN is the car maker's number for this ECU.
Questions
Which ECU does this VW Golf 3.2 R32 Stage 3 file fit?
A Bosch ME7.1.1 ECU with hardware 0261207884, part number 022906032CN and software 366355 (1037366355). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ME7.1.1 read and written?
Over OBD and on the bench, with tools such as Alientech KESS3, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Golf 3.2 R32?
Usually about 272 hp and 345 Nm against 250 hp and 320 Nm stock (+22 hp, +25 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch ME7.1.1 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
Stage 1 or Stage 2 on the VW Golf 3.2 R32?
Stage 1, about 272 hp and 345 Nm, is for a standard car. Stage 2, about 280 hp and 365 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.
What exactly is in the download?
A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand