Instant download
VW Passat 3.6 FSI original file Bosch HW 0261S02625 · 03H906032DQ · SW 394385
2008 · Petrol · 300 hp (221 kW)
Choose your file
Dyno sheet
- Power
- 300 hp
- Torque
- 350 Nm
Typical crank figures for a healthy R36 - 3.6 FSI. Results depend on the car's condition, fuel and parts.
- Power
- 300 hp 221 kW
- ECU
- Bosch
- Engine
- R36 - 3.6 FSI Turbo petrol · 3,597 cc · 6 cyl
- File
- 2 MB BIN, ready to write
Bosch on the VW Passat 3.6 FSI
Software and hardware
- Hardware
- 0261S02625 Bosch's number for the ECU itself, on its label printed 0 261 S02 625
- Part number
- 03H906032DQ Volkswagen's part number for this ECU, printed 03H 906 032 DQ
- Software
- 394385 (1037394385) The software inside: your read must show this number
How the Bosch is read: OBD and Bench
Older tools
Built on request for the VW Passat 3.6 FSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261S02625, part number 03H906032DQ and software 394385
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261S02625, part number 03H906032DQ and software 394385 (1037394385), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2008 VW Passat 3.6 FSI (221 kW, 300 hp), for its Bosch ECU with hardware 0261S02625, part number 03H906032DQ and software 394385 (1037394385). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Passat 3.6 FSI carries the R36 - 3.6 FSI engine, 300 hp and 350 Nm from the factory. On this engine, Stage 1 usually gives about 320 hp and 370 Nm (+20 hp, +20 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 394385 of the VW Passat 3.6 FSI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261S02625 is the number on the Bosch ECU's label. Software 394385 (1037394385) is the calibration inside it: a read with hardware 0261S02625 and another software number needs a different file. Part number 03H906032DQ is the car maker's number for this ECU.
Questions
Which ECU does this VW Passat 3.6 FSI original file fit?
A Bosch ECU with hardware 0261S02625, part number 03H906032DQ and software 394385 (1037394385). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ECU read and written?
Over OBD and on the bench, with tools such as CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Passat 3.6 FSI?
Usually about 320 hp and 370 Nm against 300 hp and 350 Nm stock (+20 hp, +20 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch ECU file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand