Instant download
Audi A1 1.2 TFSI original file Siemens/Continental SIMOS10.24 · 03F906070GN · SW SA300O6000000
Turbo petrol · 86 hp (63 kW)
Choose your file
Dyno sheet
- Power
- 86 hp
- Torque
- 160 Nm
Typical crank figures for a healthy 1.2 TFSI. Results depend on the car's condition, fuel and parts.
- Power
- 86 hp 63 kW
- ECU
- Siemens/Continental SIMOS10.24
- Engine
- 1.2 TFSI Turbo petrol · 1,197 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Siemens/Continental SIMOS10.24 on the Audi A1 1.2 TFSI
Software and hardware
- Part number
- 03F906070GN Audi's part number for this ECU, printed 03F 906 070 GN
- Software
- SA300O6000000 The software inside: your read must show this number
How the Siemens/Continental SIMOS10.24 is read: OBD and Bench
Older tools
Built on request for the Audi A1 1.2 TFSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Start/stop off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03F906070GN and software SA300O6000000
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03F906070GN and software SA300O6000000, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the Audi A1 1.2 TFSI (63 kW, 86 hp), for its Siemens/Continental SIMOS10.24 ECU with part number 03F906070GN and software SA300O6000000. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The Audi A1 1.2 TFSI carries the 1.2 TFSI engine, 86 hp and 160 Nm from the factory. On this engine, Stage 1 usually gives about 130 hp and 215 Nm (+44 hp, +55 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software SA300O6000000 of the Audi A1 1.2 TFSI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Siemens/Continental SIMOS10.24 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software SA300O6000000 is the calibration inside the Siemens/Continental ECU. Part number 03F906070GN is the car maker's number for this ECU.
Questions
Which ECU does this Audi A1 1.2 TFSI original file fit?
A Siemens/Continental SIMOS10.24 ECU with part number 03F906070GN and software SA300O6000000. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Siemens/Continental SIMOS10.24 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Audi A1 1.2 TFSI?
Usually about 130 hp and 215 Nm against 86 hp and 160 Nm stock (+44 hp, +55 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Siemens/Continental SIMOS10.24 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
Does software SA300O6000000 fit other cars?
We also sell this software for the Seat Leon 1.2 TSI. The hardware number on your ECU decides whether the same file fits: match it before you write.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand