STAGE 1 Diesel 1.3 JTDM 95hp

Alfa Romeo Mito 1.3 JTD 16V Turbo Diesel 69.9 kW (95 HP) Marelli

Alfa Romeo Mito 1.3 JTD 16V Turbo Diesel 69.9 kW (95 HP) Marelli 51892330 Stage 1
0306090120 10002000300040005000 115 HP +20 240 Nm +40 HP Nm RPM 060120180240
Stock Stage 1 HP / Nm projection
95 115 HP
+20 HP +40 Nm 21% more power

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #112 · Gains DB
MATCHED ENGINE 1.3 JTDM 95hp 199B1000 1.2L Diesel Stage 1
0306090120 10002000300040005000 115 HP +20 240 Nm +40 HP Nm RPM 060120180240
Stock Stage 1 HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Stage 1 · Diesel
Hardware
  • No hardware changes required — runs on completely stock hardware
Software / Calibration
  • Boost pressure optimised within factory turbo limits
  • Injection timing & quantity remapped
  • Smoke / EGT limiters refined
  • DTCs left intact, factory safeties preserved

Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Alfa Romeo
Vehicle model Mito
Model year 2011
Displacement 1.3 L
Fuel / Induction Turbo Diesel
Factory power 69.9 kW (95 HP)
ECU manufacturer Marelli
ECU hardware 51892330
Calibration stage Stage 1
Cylinder capacity 1248 CC
Compression ratio 16,8 : 1
Bore × Stroke 69,6 X 82,0 mm
OEM engine code 199B1000
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine1.3 JTDM 95hp Code199B1000 Displacement1.2L Capacity1248 CC Compression16,8 : 1 Bore × Stroke69,6 X 82,0 mm FuelDiesel Engine ID#112
Stage Power Torque Δ HP Δ Nm
Original / Factory 95 HP 200 Nm — —
Stage 1 115 HP 240 Nm +20 (21.1%) +40
Stage 2 121 HP 250 Nm +26 (27.4%) +50
Stage 3 143 HP 310 Nm +48 (50.5%) +110
Stage 4 171 HP 370 Nm +76 (80%) +170
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

The Stage 1 calibration for the 2011 Alfa Romeo Mito 1.3L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.

This file matches a Marelli ECU with hardware number 51892330. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

Projected output on a healthy, stock-hardware example of this engine: 115 HP and 240 Nm at the crank — a gain of +20 HP (21%) and +40 Nm over the factory 95 HP / 200 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 51892330 (Marelli) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

No. Stage 1 is explicitly a stock-hardware tune — no turbo, injector, fuel-pump, intercooler or exhaust changes are required. The only prerequisite is a mechanically healthy engine with good compression, clean EGR/DPF state, and fresh service fluids.

Re-flashing the ECU leaves a flag that a franchised Alfa Romeo dealer can detect with their diagnostic tool. Most markets treat this as a basis to deny powertrain warranty claims that the modification could have caused. Emissions-sensitive components (DPF, EGR, SCR) remain fully functional with this calibration — we do not remove, disable or alter any emissions hardware.

The power and torque numbers on this page are healthy-engine crank figures. On a well-maintained 2011 Alfa Romeo Mito running a known-good fuel brand, you should see a clearly perceptible increase in mid-range pull — typically from 1,800 to 4,000 rpm on diesel, 2,500 to 6,000 rpm on petrol — along with a shorter 80-to-120 km/h in-gear time. Thermal performance and fuel consumption depend on how you drive post-tune.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a calibrated Stage1 tuning file for Alfa Mito 1.3 JTD 16V 2011 Turbo-Diesel 69.9KW with Marelli 51892330. The base stock vehicle for this calibration has a factory output of around 69.9 kW (~95 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 51892330. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint48853239 E1D785B9 32A1D1F6 57EB86FA 5DDF0453 09CC4D17 5DF0C8C5 6D21CCEC

Same engine — other calibrations

Alternative stages for the same ECU: Alfa family