Stage 1
Stage 1 · Petrol · 2.0 TFSI 200hp
Audi A3 2.0 TFSI Stage 1 file Bosch HW 0261B00486 · 8P0907115
Audi A3 2.0 TFSI Turbo Petrol 147.1 kW (200 HP) Stage 12005, Turbo petrol, 147.1 kW (200 hp)
200 → 250 HP +50 HP +80 Nm 25% more power
Calibrated ECU file for 0261B00486. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TFSI 200hp, CCZ, 2L, Petrol. Engine #230 in our gains database.
- Power
- 250 HP+50 HP from 200
- Torque
- 360 Nm+80 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261B00486.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A3 |
| Model year | 2005 |
| Displacement | 2.0 L |
| Fuel / Induction | TFSI (Turbo Petrol) |
| Factory power | 147.1 kW (200 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261B00486 |
| ECU software | 8P0907115 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1984 CC |
| Compression ratio | 9,6 : 1 |
| Bore × Stroke | 82,5 X 92,8 mm |
| OEM engine code | CCZ |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 200 HP | 280 Nm | — | — |
| Stage 1 | 250 HP | 360 Nm | +50 (25%) | +80 |
| Stage 2 | 270 HP | 400 Nm | +70 (35%) | +120 |
| Stage 3 | 320 HP | 430 Nm | +120 (60%) | +150 |
| Stage 4 | 390 HP | 518 Nm | +190 (95%) | +238 |
About this calibration file
The Stage 1 calibration for the 2005 Audi A3 2.0L TFSI (Turbo Petrol) is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0261B00486 and software version 8P0907115. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 250 HP and 360 Nm at the crank — a gain of +50 HP (25%) and +80 Nm over the factory 200 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261B00486 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Audi A3 2.0 TFSI 2005 Turbo-Benzin 147.1KW with Bosch 0261B00486 and software ID 8P0907115. The base stock vehicle for this calibration has a factory output of around 147.1 kW (~200 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261B00486, 8P0907115. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C2F49889 16209697 B45CB97E 14008A19 858985E0 8CC267AA EAED2BB9 D8731B1F