Instant download
Audi A4 1.8 T original file Bosch ME7.5 HW 0261208500 · 8E0909518AS · SW 369011
2002 · Turbo petrol · 190 hp (140 kW)
Choose your file
Launch control, anti-lag, rolling anti-lag and no-lift shift for Bosch ME7
This function is available for this file: set your values here and download the file built on this Original file. Sign in to make it, or join the membership and make files from any read we hold.
Beta. These functions are new; if a file you make does not do what this page says, tell us and we correct it free.
Dyno sheet
- Power
- 190 hp
- Torque
- 235 Nm
Typical crank figures for a healthy 1.8 T. Results depend on the car's condition, fuel and parts.
- Power
- 190 hp 140 kW
- ECU
- Bosch ME7.5
- Engine
- 1.8 T Turbo petrol · 1,781 cc · 4 cyl
- File
- 1 MB BIN, ready to write
Bosch ME7.5 on the Audi A4 1.8 T
Software and hardware
- Hardware
- 0261208500 Bosch's number for the ECU itself, on its label printed 0 261 208 500
- Part number
- 8E0909518AS Audi's part number for this ECU, printed 8E0 909 518 AS
- Software
- 369011 (1037369011) The software inside: your read must show this number
How the Bosch ME7.5 is read: OBD and Bench
Older tools
Built on request for the Audi A4 1.8 T
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261208500, part number 8E0909518AS and software 369011
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261208500, part number 8E0909518AS and software 369011 (1037369011), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2002 Audi A4 1.8 T (140 kW, 190 hp), for its Bosch ME7.5 ECU with hardware 0261208500, part number 8E0909518AS and software 369011 (1037369011). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The Audi A4 1.8 T carries the 1.8 T engine, 190 hp and 235 Nm from the factory. On this engine, Stage 1 usually gives about 210 hp and 340 Nm (+20 hp, +105 Nm); Stage 2 usually gives about 220 hp and 350 Nm (+30 hp, +115 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 369011 of the Audi A4 1.8 T we sell the original, Stage 1 and Stage 2. Stage 1 and Stage 2 each come in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch ME7.5 ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261208500 is the number on the Bosch ECU's label. Software 369011 (1037369011) is the calibration inside it: a read with hardware 0261208500 and another software number needs a different file. Part number 8E0909518AS is the car maker's number for this ECU.
Questions
Which ECU does this Audi A4 1.8 T original file fit?
A Bosch ME7.5 ECU with hardware 0261208500, part number 8E0909518AS and software 369011 (1037369011). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ME7.5 read and written?
Over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Audi A4 1.8 T?
Usually about 210 hp and 340 Nm against 190 hp and 235 Nm stock (+20 hp, +105 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch ME7.5 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
Stage 1 or Stage 2 on the Audi A4 1.8 T?
Stage 1, about 210 hp and 340 Nm, is for a standard car. Stage 2, about 220 hp and 350 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.
What exactly is in the download?
A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand