Stage 1
Stage 1 · Diesel · 2.0 TDI CR 102hp
VW Caddy 1.6 TDI CR Stage 1 file Siemens · 03L906023PD
Volkswagen Caddy 1.6 TDI CR Turbo Diesel 75 kW (102 HP) Stage 12012, Turbo diesel, 75 kW (102 hp)
102 → 145 HP +43 HP +40 Nm 42% more power
Calibrated ECU file for 03L906023PD. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TDI CR 102hp, 2L, Diesel. Engine #7564 in our gains database.
- Power
- 145 HP+43 HP from 102
- Torque
- 320 Nm+40 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03L906023PD.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volkswagen |
|---|---|
| Vehicle model | Caddy |
| Model year | 2012 |
| Displacement | 1.6 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 75 kW (102 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 03L906023PD |
| ECU software | SM2F0L9500000 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1968 CC |
| Compression ratio | 16,5 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | 2.0 TDI CR 102hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 102 HP | 280 Nm | — | — |
| Stage 1 | 145 HP | 320 Nm | +43 (42.2%) | +40 |
| Stage 2 | 148 HP | 336 Nm | +46 (45.1%) | +56 |
| Stage 3 | 155 HP | 434 Nm | +53 (52%) | +154 |
| Stage 4 | 184 HP | 518 Nm | +82 (80.4%) | +238 |
About this calibration file
The Stage 1 calibration for the 2012 Volkswagen Caddy 1.6L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Siemens ECU with hardware number 03L906023PD and software version SM2F0L9500000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 145 HP and 320 Nm at the crank — a gain of +43 HP (42%) and +40 Nm over the factory 102 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
03L906023PD (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for VW Caddy 1.6 TDI CR 2012 Turbo-Diesel 75KW with Siemens 03L906023PD and software ID SM2F0L9500000. The base stock vehicle for this calibration has a factory output of around 75 kW (~102 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 03L906023PD, SM2F0L9500000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
2D63C480 BC308FE4 A05A9086 3A7FE590 685A05DA 50490E92 C850325E 4D1A3C8D