Instant download
VW Caddy 2.0 TDI CR original file Bosch EDC17 · 03L906018NL · SW 518057
2012 · Turbo diesel · 140 hp (103 kW)
Choose your file
Dyno sheet
- Power
- 140 hp
- Torque
- 320 Nm
Typical crank figures for a healthy 2.0 CRTDI. Results depend on the car's condition, fuel and parts.
- Power
- 140 hp 103 kW
- ECU
- Bosch EDC17
- Engine
- 2.0 CRTDI Turbo diesel · 1,968 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch EDC17 on the VW Caddy 2.0 TDI CR
Software and hardware
- Part number
- 03L906018NL Volkswagen's part number for this ECU, printed 03L 906 018 NL
- Software
- 518057 (1037518057) The software inside: your read must show this number
How the Bosch EDC17 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Caddy 2.0 TDI CR
- DPF off
- EGR off
- AdBlue (SCR) off
- DTC off
- Speed limiter (Vmax) off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03L906018NL and software 518057
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03L906018NL and software 518057 (1037518057), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2012 VW Caddy 2.0 TDI CR (103 kW, 140 hp), for its Bosch EDC17 ECU with part number 03L906018NL and software 518057 (1037518057). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Caddy 2.0 TDI CR carries the 2.0 CRTDI engine, 140 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 185 hp and 410 Nm (+45 hp, +90 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 518057 of the VW Caddy 2.0 TDI CR we sell the original and Stage 1. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 CRTDI engine with the same ECU is fitted to the Seat Altea XL, Seat Leon 1P, Skoda Octavia II, Skoda Yeti, Volkswagen Caddy IV, Volkswagen Golf VII and Volkswagen Touran I (Facelift 2010): their file can be the same, so check the software number of your read.
DPF off, EGR off, AdBlue (SCR) off, DTC off and speed limiter (Vmax) off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 518057 (1037518057) is the calibration inside the Bosch ECU. Part number 03L906018NL is the car maker's number for this ECU.
Questions
Which ECU does this VW Caddy 2.0 TDI CR original file fit?
A Bosch EDC17 ECU with part number 03L906018NL and software 518057 (1037518057). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC17 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Caddy 2.0 TDI CR?
Usually about 185 hp and 410 Nm against 140 hp and 320 Nm stock (+45 hp, +90 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC17 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand