Original file
Original / Factory · Diesel · 330d 3000 D 201hp
BMW E90 325d original file Bosch · SW 504248
BMW E90 325d Turbo Diesel 150 kW (204 HP) Original2011, Turbo diesel, 150 kW (204 hp)
201 HP Factory calibration Stock backup file, 469 Nm, Diesel
Calibrated ECU file for 76SLKM882A (SW 504248). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 330d 3000 D 201hp, M57TUD30, Diesel. Engine #9448 in our gains database.
- Power
- 201 HPfactory calibration
- Torque
- 469 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware O and software 504248.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 325d |
| Model year | 2011 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 150 kW (204 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 76SLKM882A |
| ECU software | 504248 |
| Calibration stage | Original (Factory) |
| OEM engine code | M57TUD30 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 201 HP | 469 Nm | — | — |
| Stage 1 | 248 HP | 566 Nm | +47 (23.4%) | +97 |
| Stage 2 | 285 HP | 689 Nm | +84 (41.8%) | +220 |
| Stage 3 | 302 HP | 727 Nm | +101 (50.2%) | +258 |
| Stage 4 | 362 HP | 868 Nm | +161 (80.1%) | +399 |
About this calibration file
This is the factory (original) ECU calibration for the 2011 BMW E90 325d Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 76SLKM882A and software version 504248. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
76SLKM882A (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E90 325d 2011 Turbo-Diesel 150KW with Bosch O and software ID 76SLKM882A (Bosch software number 504248 ( 1037504248 )). This original file corresponds to a factory engine output of approximately 150 kW (~204 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as O, 76SLKM882A, 504248 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E6304B5A 0119D6E8 D072195C A67AD59D CEF98A6A FF2E6F15 D7AF9D5C 5C684584