Instant download
Volvo XC90 2.5 Turbo Stage 1 file Bosch HW 0261204559 · SW 359462
2004 · Turbo petrol · 210 hp (155 kW)
Choose your file
Dyno sheet
- Power
- 239 hp +29
- Torque
- 370 Nm +50
Typical crank figures for a healthy 2.5 T. Results depend on the car's condition, fuel and parts.
- Power
- 210 hp 155 kW
- ECU
- Bosch
- Engine
- 2.5 T Turbo petrol · 2,521 cc · 5 cyl
- File
- 1 MB BIN, ready to write
Bosch on the Volvo XC90 2.5 Turbo
Software and hardware
- Hardware
- 0261204559 Bosch's number for the ECU itself, on its label printed 0 261 204 559
- Software
- 359462 (1037359462) The software inside: your read must show this number
How the Bosch is read: OBD and Bench
Built on request for the Volvo XC90 2.5 Turbo
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261204559 and software 359462
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261204559 and software 359462 (1037359462), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2004 Volvo XC90 2.5 Turbo (155 kW, 210 hp), for its Bosch ECU with hardware 0261204559 and software 359462 (1037359462). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 2.5 T raises the boost, sets the ignition and the fuelling to match and lifts the torque limits, within what the standard turbo and fuel pump hold. It wants the fuel octane the car was made for, or better.
The Volvo XC90 2.5 Turbo carries the 2.5 T engine, 210 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 239 hp and 370 Nm (+29 hp, +50 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 359462 of the Volvo XC90 2.5 Turbo we sell the original and Stage 1. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash and Dimsport New Trasdata. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off and pops and bangs can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261204559 is the number on the Bosch ECU's label. Software 359462 (1037359462) is the calibration inside it: a read with hardware 0261204559 and another software number needs a different file.
Questions
Which ECU does this Volvo XC90 2.5 Turbo Stage 1 file fit?
A Bosch ECU with hardware 0261204559 and software 359462 (1037359462). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ECU read and written?
Over OBD and on the bench, with tools such as CMD Flash and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Volvo XC90 2.5 Turbo?
Usually about 239 hp and 370 Nm against 210 hp and 320 Nm stock (+29 hp, +50 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch ECU file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand