Original file
Original / Factory · Petrol · 3.4i 300hp
Porsche 996 3.2 original file Bosch HW 0261204605 · SW 357099
Porsche 996 3.2 Petrol 220.6 kW (300 HP) Original1999, Petrol, 220.6 kW (300 hp)
300 HP Factory calibration Stock backup file, 340 Nm, Petrol
Calibrated ECU file for 0261204605 (SW 357099). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.4i 300hp, M96.01, 3.4L, Petrol. Engine #6105 in our gains database.
- Power
- 300 HPfactory calibration
- Torque
- 340 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261204605 and software 357099.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Porsche |
|---|---|
| Vehicle model | 996 |
| Model year | 1999 |
| Displacement | 3.2 L |
| Fuel / Induction | Petrol |
| Factory power | 220.6 kW (300 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261204605 |
| ECU software | 357099 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 3387 CC |
| Compression ratio | 11,3 : 1 |
| Bore × Stroke | 96,0 X 78,0 mm |
| OEM engine code | M96.01 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 300 HP | 340 Nm | — | — |
| Stage 1 | 320 HP | 360 Nm | +20 (6.7%) | +20 |
| Stage 2 | 339 HP | 378 Nm | +39 (13%) | +38 |
| Stage 3 | 495 HP | 527 Nm | +195 (65%) | +187 |
| Stage 4 | 585 HP | 629 Nm | +285 (95%) | +289 |
About this calibration file
This is the factory (original) ECU calibration for the 1999 Porsche 996 3.2L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261204605 and software version 357099. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261204605 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Porsche 996 3.2 1999 Benzin 220.6KW with Bosch 0261204605 (Bosch software number 357099 ( 1037357099 )). This original file corresponds to a factory engine output of approximately 220.6 kW (~300 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261204605, 357099 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E76451B4 F206FA4B C1279DA5 CF9C9065 1EE0D81B 089403A7 984F1DC3 92B6805C