Original file
Original / Factory · Diesel · 213/313/413/513 BlueTEC 129hp
MB Sprinter 220CDI original file Bosch · SW 381130
Mercedes-Benz Sprinter 220CDI Turbo Diesel 91.9 kW (125 HP) Original2007, Turbo diesel, 91.9 kW (125 hp)
129 HP Factory calibration Stock backup file, 305 Nm, Diesel
Calibrated ECU file for (SW 381130). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 213/313/413/513 BlueTEC 129hp, 2.1L, Diesel. Engine #4962 in our gains database.
- Power
- 129 HPfactory calibration
- Torque
- 305 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 080KW and software 381130.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Sprinter 220cdi |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 91.9 kW (125 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | CR40-64X-65T2-906-080KW-40-0MEF-05-IAP-000 |
| ECU software | 381130 |
| Calibration stage | Original (Factory) |
| OEM engine code | 213/313/413/513 BlueTEC 129hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 129 HP | 305 Nm | — | — |
| Stage 1 | 180 HP | 420 Nm | +51 (39.5%) | +115 |
| Stage 2 | 189 HP | 437 Nm | +60 (46.5%) | +132 |
| Stage 3 | 198 HP | 473 Nm | +69 (53.5%) | +168 |
| Stage 4 | 232 HP | 564 Nm | +103 (79.8%) | +259 |
About this calibration file
This is the factory (original) ECU calibration for the 2007 Mercedes-Benz Sprinter 220cdi Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number CR40-64X-65T2-906-080KW-40-0MEF-05-IAP-000 and software version 381130. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
CR40-64X-65T2-906-080KW-40-0MEF-05-IAP-000 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB Sprinter 220CDI 2007 Turbodiesel 91.9KW with Bosch CR40-64x-65T2-906-080KW-40-0MEF-05-IAP-000 and software ID DPF7 (Bosch software number 381130 ( 1037381130 )). This original file corresponds to a factory engine output of approximately 91.9 kW (~125 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as CR40-64x-65T2-906-080KW-40-0MEF-05-IAP-000, DPF7, 381130 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C3E7E794 5D66A7E8 F72942C7 EB4B882F 498FD9CC 2B95E6F5 02F4DBE0 83571AF4