ORIGINAL / FACTORY Petrol 350 CGi 292hp

MB Econic 2629 2008 Turbodiesel 213.3KW Temic OM906LA.V-3-03 08E Original OM906LA.V-3-03 #6888

070140210280 1000200030004000500060007000 292 HP +0 365 Nm +0 HP Nm RPM 0100200300400
Stock Original / Factory HP / Nm projection
292 HP Factory calibration
Stock backup file — 365 Nm · Petrol

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #5258 · Gains DB
MATCHED ENGINE 350 CGi 292hp M272.983 3.5L Petrol Factory
070140210280 1000200030004000500060007000 292 HP +0 365 Nm +0 HP Nm RPM 0100200300400
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Mercedes-Benz
Vehicle model Econic 2629
Model year 2008
Fuel / Induction Turbo Diesel
Factory power 213.3 kW (290 HP)
Calibration stage Original (Factory)
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

About this calibration file

This is the factory (original) ECU calibration for the 2008 Mercedes-Benz Econic 2629 Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Mercedes-Benz dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.
ECU SpecificationFactory values
Vehicle MB Econic 2629 2008 Turbodiesel 213.3KW
Engine power 213.3 kW (~290 HP)
Fuel type Turbo-diesel
ECU brand Temic
ECU hardware OM906LA.V-3-03
ECU software ID 08E
Tuning type Original
Read method / notes 08E

This product contains a complete original ECU backup (stock file) for MB Econic 2629 2008 Turbodiesel 213.3KW with Temic OM906LA.V-3-03 and software ID 08E. This original file corresponds to a factory engine output of approximately 213.3 kW (~290 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as OM906LA.V-3-03, 08E. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint8360571A ED903BFA 5918B98D AD83EEAD 090BFE7A 7A636F86 91D26E8E F275F2A2

Same engine — other calibrations

Alternative stages for the same ECU: MB family