Original file
AUDI A5 3.0 TDI 8R0907401J - ORIGINAL & DPF OFF full flash original file 8R0907401J
AUDI A5 3.0 TDI 8R0907401J - ORIGINAL & DPF OFF full flashCalibrated ECU file for 8R0907401J. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A5 |
| Displacement | 3.0 L |
| Fuel / Induction | TDI (Turbo Diesel) |
| Calibration stage | Original (Factory) |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
About this calibration file
This is the factory (original) ECU calibration for the Audi A5 3.0L TDI (Turbo Diesel), extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
FILE SPECIFICATIONS: AUDI A5 3.0 TDI CR DPF | 2011
If you require any additional services such as Stage 1 or Stage 2 tuning, DTC (Diagnostic Trouble Code) removal, MAF (Mass Air Flow sensor) adjustment, EGR (Exhaust Gas Recirculation) deactivation, popcorn exhaust, hardcut limiters, or launch control, we’re fully equipped to assist you. Let us know how we can help!
| Car | Audi A5 3.0 TDI CR DPF |
|---|---|
| Type | – |
| Model year | 2011 |
| Displacement | 2.967 |
| Output | 239.3PS / 176.0kW |
| Gear | Automatic Transmission |
| ECU manufacturer | Bosch |
| ECU name | EDC17CP14 |
| ECU prod nr | 8R0907401J |
| Hardware nr | 8R0907401J |
| Software | 1037516613 / 516613 |
| Software version | 0008 |
| Software size | 400000 |
| Project type | Complete binary file |
| Read hardware | Autotuner Bench |
| 8 bit sum | 8063 |