Original file
Original / Factory · Diesel · 2.0 TDCi 163hp
Ford Focus 1.8 TDCi original file Siemens
Ford Focus 1.8 TDCi Turbo Diesel 117.7 kW (160 HP) Original2005, Turbo diesel, 117.7 kW (160 hp)
163 HP Factory calibration Stock backup file, 340 Nm, Diesel
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TDCi 163hp, TXDB, 2L, Diesel. Engine #2878 in our gains database.
- Power
- 163 HPfactory calibration
- Torque
- 340 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware FO20040000000.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Focus |
| Model year | 2005 |
| Displacement | 1.8 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 117.7 kW (160 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | FO20040000000 |
| Calibration stage | Original (Factory) |
| OEM engine code | TXDB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 163 HP | 340 Nm | — | — |
| Stage 1 | 200 HP | 415 Nm | +37 (22.7%) | +75 |
| Stage 2 | 210 HP | 432 Nm | +47 (28.8%) | +92 |
| Stage 3 | 245 HP | 527 Nm | +82 (50.3%) | +187 |
| Stage 4 | 293 HP | 629 Nm | +130 (79.8%) | +289 |
About this calibration file
This is the factory (original) ECU calibration for the 2005 Ford Focus 1.8L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number FO20040000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
FO20040000000 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Ford Focus 1.8 TDCi 2005 Turbo-Diesel 117.7KW with Siemens FO20040000000. This original file corresponds to a factory engine output of approximately 117.7 kW (~160 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as FO20040000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
CF502B6A A513802D 68D191A3 936F5F4E CFFA3688 AF2CA29E 2701B4D1 B1B0715D