Original file
Original / Factory · Diesel · 1.5 Ecoblue 95hp
Ford Focus 1.8 TDCi original file Bosch
Ford Focus 1.8 TDCi Turbo Diesel 74.3 kW (101 HP) OriginalTurbo diesel, 74.3 kW (101 hp)
95 HP Factory calibration Stock backup file, 300 Nm, Diesel
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.5 Ecoblue 95hp, 1.5L, Diesel. Engine #2894 in our gains database.
- Power
- 95 HPfactory calibration
- Torque
- 300 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Delphi.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Focus |
| Displacement | 1.8 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 74.3 kW (101 HP) |
| ECU manufacturer | Bosch |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1499 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 73,5 X 88,3 mm |
| OEM engine code | 1.5 Ecoblue 95hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 95 HP | 300 Nm | — | — |
| Stage 1 | 120 HP | 280 Nm | +25 (26.3%) | +-20 |
| Stage 2 | 135 HP | 338 Nm | +40 (42.1%) | +38 |
| Stage 3 | 143 HP | 465 Nm | +48 (50.5%) | +165 |
| Stage 4 | 171 HP | 555 Nm | +76 (80%) | +255 |
About this calibration file
This is the factory (original) ECU calibration for the Ford Focus 1.8L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Ford Focus 1.8 TDCi Turbodiesel 74.3KW with Bosch Delphi. This original file corresponds to a factory engine output of approximately 74.3 kW (~101 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Delphi. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
886B6F30 86FE5BE6 E2A4B0EF F62EC244 3AD9ADB7 636DAE1C 0DFDCD31 4BEE169D