Stage 1
Stage 1 · Diesel · 2.0 TDCi 115hp
Ford Mondeo 2.0 TDDi Stage 1 file Visteon
Ford Mondeo 2.0 TDDi Turbo Diesel 84.6 kW (115 HP) Stage 12002, Turbo diesel, 84.6 kW (115 hp)
115 → 140 HP +25 HP +60 Nm 22% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TDCi 115hp, HJBB, 2L, Diesel. Engine #2975 in our gains database.
- Power
- 140 HP+25 HP from 115
- Torque
- 340 Nm+60 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Mondeo |
| Model year | 2002 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 84.6 kW (115 HP) |
| ECU manufacturer | Visteon |
| ECU ID | 2S7A-12A650-AHC |
| ECU hardware | CAD-2C07 |
| ECU software | ZFH2 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1998 CC |
| Compression ratio | 18,5 : 1 |
| Bore × Stroke | 86,0 X 86,0 mm |
| OEM engine code | HJBB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 280 Nm | — | — |
| Stage 1 | 140 HP | 340 Nm | +25 (21.7%) | +60 |
| Stage 2 | 147 HP | 354 Nm | +32 (27.8%) | +74 |
| Stage 3 | 173 HP | 434 Nm | +58 (50.4%) | +154 |
| Stage 4 | 207 HP | 518 Nm | +92 (80%) | +238 |
About this calibration file
The Stage 1 calibration for the 2002 Ford Mondeo 2.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Visteon ECU with hardware number CAD-2C07 and software version ZFH2. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 140 HP and 340 Nm at the crank — a gain of +25 HP (22%) and +60 Nm over the factory 115 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
CAD-2C07 (Visteon) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Ford Mondeo 2.0 TDDi 2002 Turbodiesel 84.6KW Visteon 2S7A-12A650-AHC ZFH2 CAD-2C07 . The base stock vehicle for this calibration has a factory output of around 84.6 kW (~115 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
2368F8A4 746E6663 9725902E 582F067D 47443AF9 541C6393 508E7760 9FD8F6D7