ORIGINAL / FACTORY Petrol 2.0i 8v GTI 115hp

Volkswagen Golf 3 2.0l 8V Petrol 84.6 kW (115 HP)

Volkswagen Golf 3 2.0l 8V Petrol 84.6 kW (115 HP) 0261200596 037906024B 200597 Original
0306090120 1000200030004000500060007000 115 HP +0 168 Nm +0 HP Nm RPM 04080120160
Stock Original / Factory HP / Nm projection
115 HP Factory calibration
Stock backup file — 168 Nm · Petrol

Calibrated ECU file for 0261200596 (SW 200597). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #8703 · Gains DB
MATCHED ENGINE 2.0i 8v GTI 115hp ADY 2L Petrol Factory
0306090120 1000200030004000500060007000 115 HP +0 168 Nm +0 HP Nm RPM 04080120160
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Volkswagen
Vehicle model Golf3 2 0l
Model year 1992
Fuel / Induction Petrol
Factory power 84.6 kW (115 HP)
ECU hardware 0261200596
ECU software 200597
Calibration stage Original (Factory)
Cylinder capacity 1984 CC
Compression ratio 10,0 : 1
Bore × Stroke 82,5 X 92,8 mm
OEM engine code ADY
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine2.0i 8v GTI 115hp CodeADY Displacement2L Capacity1984 CC Compression10,0 : 1 Bore × Stroke82,5 X 92,8 mm FuelPetrol Engine ID#8703
Stage Power Torque Δ HP Δ Nm
Original / Factory 115 HP 168 Nm — —
Stage 1 125 HP 185 Nm +10 (8.7%) +17
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

This is the factory (original) ECU calibration for the 1992 Volkswagen Golf3 2 0l Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a OEM ECU with hardware number 0261200596 and software version 200597. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 0261200596 listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Volkswagen dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a complete original ECU backup (stock file) for VW Golf3 2.0l 8V 1992 Benzin 84.6KW 0261200596 037906024B 200597 . This original file corresponds to a factory engine output of approximately 84.6 kW (~115 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint0FB51391 1FCB5B4B B2393921 A369D673 CCE8D38A 31F9FCEF DE38F96F 9A73349B

Same engine — other calibrations

Alternative stages for the same ECU: Volkswagen family