Original file
Original / Factory · Diesel · 2.0 CRDi 136hp
Hyundai IX35 2.0crdi original file Bosch · SW 512593
Hyundai IX35 2.0crdi Turbo Diesel 99.3 kW (135 HP) Original2011, Turbo diesel, 99.3 kW (135 hp)
136 HP Factory calibration Stock backup file, 320 Nm, Diesel
Calibrated ECU file for (SW 512593). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 CRDi 136hp, D4HA, 2L, Diesel. Engine #3414 in our gains database.
- Power
- 136 HPfactory calibration
- Torque
- 320 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 512593 and software 512593.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Hyundai |
|---|---|
| Vehicle model | Ix35 2 0crdi |
| Model year | 2011 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 99.3 kW (135 HP) |
| ECU manufacturer | Bosch |
| ECU software | 512593 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1998 CC |
| Compression ratio | 16,5 : 1 |
| Bore × Stroke | 86,0 X 86,0 mm |
| OEM engine code | D4HA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 136 HP | 320 Nm | — | — |
| Stage 1 | 175 HP | 410 Nm | +39 (28.7%) | +90 |
| Stage 2 | 184 HP | 426 Nm | +48 (35.3%) | +106 |
| Stage 3 | 204 HP | 496 Nm | +68 (50%) | +176 |
| Stage 4 | 245 HP | 592 Nm | +109 (80.1%) | +272 |
About this calibration file
This is the factory (original) ECU calibration for the 2011 Hyundai Ix35 2 0crdi Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 512593. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Hyundai IX35 2.0crdi 2011 Turbo-Diesel 99.3KW with Bosch 512593. This original file corresponds to a factory engine output of approximately 99.3 kW (~135 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 512593. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
2A7C6BB4 E0C0CC51 A29BADDD 4605618E 992AD4CC 07AA0135 5D8FC0EC 9332B93A