Stage 1 file Instant download
Jeep wrangler 2.8crd Stage 1 file Bosch EDC17 · SW 519628
2012, 147.1 kW (200 hp)
Stock 200 hp → Stage 1 235 hp +35 hp +110 Nm
This is a Stage 1 tune of the factory calibration of the 2012 Jeep wrangler 2.8crd (147.1 kW, 200 hp), for its Bosch EDC17 ECU with software 519628 (1037519628). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Check your read
Not sure it fits? Drop your read here and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
Every file for this software
The original and the tunes we sell for software 519628, each made from the same read.
| File | Price | Buy |
|---|---|---|
| Original | £6.99 | Add to cart |
| Stage 1 this page | £21.99 | Add to cart |
Power and torque
2.8 CRD, diesel
| Power | Torque | Gain | |
|---|---|---|---|
| Stock | 200 hp | 410 Nm | Factory |
| Stage 1 | 235 hp | 520 Nm | +35 hp, +110 Nm |
Typical crank figures for a healthy 2.8 CRD, shown only for the files on sale here. Results depend on the car's condition, fuel and parts.
About this file
Stage 1 on the 2.8 CRD raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.
The Jeep wrangler 2.8crd carries the 2.8 CRD engine, 200 hp and 410 Nm from the factory. On this engine, Stage 1 usually gives about 235 hp and 520 Nm (+35 hp, +110 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 519628 of the Jeep wrangler 2.8crd we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech Kess V2, Autotuner, CMD Flash, Dimsport New Trasdata, MagicMotorsport FLEX and bFlash. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 519628 (1037519628) is the calibration inside the Bosch ECU.
How the Bosch EDC17 is read
OBD Bench
Read and written with Alientech Kess V2, Autotuner, CMD Flash, Dimsport New Trasdata, MagicMotorsport FLEX, bFlash, Alientech KESS3 and Dimsport New Genius.
- Read the ECU and keep the read: it is your way back.
- Match the numbers: software 519628.
- Pay and download: the file is in your account straight away.
- Write it back the way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows software 519628 (1037519628), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
Questions
Which ECU does this Jeep wrangler 2.8crd Stage 1 file fit?
A Bosch EDC17 ECU with software 519628 (1037519628). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC17 read and written?
Over OBD and on the bench, with tools such as Alientech Kess V2, Autotuner, CMD Flash, Dimsport New Trasdata and MagicMotorsport FLEX. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Jeep wrangler 2.8crd?
Usually about 235 hp and 520 Nm against 200 hp and 410 Nm stock (+35 hp, +110 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC17 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Send your read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.