Stage 1
Stage 1 · Diesel · 1222 4.81L R4 215hp
MB Atego 1622 Stage 1 file Temic
Mercedes-Benz Atego 1622 Turbo Diesel 161.8 kW (220 HP) Temic OM502LA.V-1-02 09D Stage 12007, Turbo diesel, 161.8 kW (220 hp)
215 → 265 HP +50 HP +103 Nm 23% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1222 4.81L R4 215hp, OM924LA, 4.8L, Diesel. Engine #14678 in our gains database.
- Power
- 265 HP+50 HP from 215
- Torque
- 605 Nm+103 Nm from 502
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware OM502LA.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Atego 1622 |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 161.8 kW (220 HP) |
| ECU manufacturer | Temic |
| ECU ID | OM502LA.V-1-02 |
| Calibration stage | Stage 1 |
| OEM engine code | OM924LA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 215 HP | 502 Nm | — | — |
| Stage 1 | 265 HP | 605 Nm | +50 (23.3%) | +103 |
| Stage 2 | 305 HP | 738 Nm | +90 (41.9%) | +236 |
| Stage 3 | 323 HP | 778 Nm | +108 (50.2%) | +276 |
| Stage 4 | 387 HP | 929 Nm | +172 (80%) | +427 |
About this calibration file
The Stage 1 calibration for the 2007 Mercedes-Benz Atego 1622 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Temic ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 265 HP and 605 Nm at the crank — a gain of +50 HP (23%) and +103 Nm over the factory 215 HP / 502 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for MB Atego 1622 2007 Turbodiesel 161.8KW with Temic OM502LA.V-1-02 and software ID 09D. The base stock vehicle for this calibration has a factory output of around 161.8 kW (~220 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as OM502LA.V-1-02, 09D. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C524F860 7D2653E1 E4485446 DD0BB35B DAB4AE28 9EE04F8D 4FF65A3F 9D52564D