Original file
Original / Factory · Diesel · 160 CDI 90hp
MB A 170 CDI original file Bosch HW 0281010990 · SW 359731
Mercedes-Benz A 170 CDI Turbo Diesel 69.9 kW (95 HP) OriginalTurbo diesel, 69.9 kW (95 hp)
90 HP Factory calibration Stock backup file, 220 Nm, Diesel
Calibrated ECU file for 0281010990 (SW 359731). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 160 CDI 90hp, OM607 DE 15 LA, 1.5L, Diesel. Engine #4535 in our gains database.
- Power
- 90 HPfactory calibration
- Torque
- 220 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010990 and software 359731.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | A 170 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 69.9 kW (95 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010990 |
| ECU software | 359731 |
| Calibration stage | Original (Factory) |
| OEM engine code | OM607 DE 15 LA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 90 HP | 220 Nm | — | — |
| Stage 1 | 108 HP | 268 Nm | +18 (20%) | +48 |
| Stage 2 | 113 HP | 279 Nm | +23 (25.6%) | +59 |
| Stage 3 | 135 HP | 341 Nm | +45 (50%) | +121 |
| Stage 4 | 162 HP | 407 Nm | +72 (80%) | +187 |
About this calibration file
This is the factory (original) ECU calibration for the Mercedes-Benz A 170 Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281010990 and software version 359731. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010990 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB A 170 CDI Turbodiesel 69.9KW with Bosch 0281010990 (Bosch software number 359731 ( 1037359731 )). This original file corresponds to a factory engine output of approximately 69.9 kW (~95 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010990, 359731 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
2F8EF003 9C93508D 47C083C8 BCEA17E9 8BE6368B 568F711E 386A0713 3671CCDB