Stage 1
Stage 1 · Petrol · 180 CGi 122hp
MB B 180 Stage 1 file Bosch
Mercedes-Benz B 180 Petrol 85.3 kW (116 HP) Stage 12006, Petrol, 85.3 kW (116 hp)
122 → 175 HP +53 HP +110 Nm 43% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 180 CGi 122hp, OM270 DE 16 AL red., 1.6L, Petrol. Engine #4541 in our gains database.
- Power
- 175 HP+53 HP from 122
- Torque
- 310 Nm+110 Nm from 200
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware M600068000000.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | B 180 |
| Model year | 2006 |
| Fuel / Induction | Petrol |
| Factory power | 85.3 kW (116 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | M600068000000 |
| Calibration stage | Stage 1 |
| OEM engine code | OM270 DE 16 AL red. |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 200 Nm | — | — |
| Stage 1 | 175 HP | 310 Nm | +53 (43.4%) | +110 |
| Stage 2 | 186 HP | 326 Nm | +64 (52.5%) | +126 |
| Stage 3 | 201 HP | 342 Nm | +79 (64.8%) | +142 |
| Stage 4 | 238 HP | 370 Nm | +116 (95.1%) | +170 |
About this calibration file
The Stage 1 calibration for the 2006 Mercedes-Benz B 180 Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number M600068000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 175 HP and 310 Nm at the crank — a gain of +53 HP (43%) and +110 Nm over the factory 122 HP / 200 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
M600068000000 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for MB B 180 2006 Benzin 85.3KW with Bosch M600068000000. The base stock vehicle for this calibration has a factory output of around 85.3 kW (~116 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as M600068000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
729B5EA9 E4E5594C 098DA158 B5E3C169 F9B1B246 6E5B73D5 99BD53D2 2579BE2C