Stage 2
Stage 2 · Diesel · 200d - 150hp
MB C220 2.2 CDI Stage 2 file Bosch · SW 372419
Mercedes-Benz C220 2.2 CDI Turbo Diesel 110.3 kW (150 HP) Stage 22005, Turbo diesel, 110.3 kW (150 hp)
150 → 210 HP +60 HP +138 Nm 40% more power
Calibrated ECU file for (SW 372419). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 200d - 150hp, 2L, Diesel. Engine #4546 in our gains database.
- Power
- 210 HP+60 HP from 150
- Torque
- 458 Nm+138 Nm from 320
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware P467-120 and software 372419.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | C220 |
| Model year | 2005 |
| Displacement | 2.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 110.3 kW (150 HP) |
| ECU manufacturer | Bosch |
| ECU ID | P467-120 |
| ECU software | 372419 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1950 CC |
| Compression ratio | 15,5 : 1 |
| Bore × Stroke | 82,0 X 92,3 mm |
| OEM engine code | 200d - 150hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 320 Nm | — | — |
| Stage 1 | 200 HP | 440 Nm | +50 (33.3%) | +120 |
| Stage 2 | 210 HP | 458 Nm | +60 (40%) | +138 |
| Stage 3 | 225 HP | 496 Nm | +75 (50%) | +176 |
| Stage 4 | 270 HP | 592 Nm | +120 (80%) | +272 |
About this calibration file
The Stage 2 calibration for the 2005 Mercedes-Benz C220 2.2L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU and software version 372419. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 210 HP and 458 Nm at the crank — a gain of +60 HP (40%) and +138 Nm over the factory 150 HP / 320 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for MB C220 2.2 CDI 2005 Turbo-Diesel 110.3KW with Bosch P467-120 (Bosch software number 372419 ( 1037372419 )). The base stock vehicle for this calibration has a factory output of around 110.3 kW (~150 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as P467-120, 372419 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
0F5DA071 2B60FA36 0E91C02C 5155DD99 4D7B2E84 76F1D7F5 F31EDB57 5C12FA96