Original file
Original / Factory · Diesel · 200 CDI 122hp
MB C 200CDI original file Bosch HW 0281011934 · SW 370737
Mercedes-Benz C 200CDI Turbo Diesel 89.7 kW (122 HP) Original2004, Turbo diesel, 89.7 kW (122 hp)
122 HP Factory calibration Stock backup file, 270 Nm, Diesel
Calibrated ECU file for 0281011934 (SW 370737). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 200 CDI 122hp, OM611 DE 22, 2.1L, Diesel. Engine #4693 in our gains database.
- Power
- 122 HPfactory calibration
- Torque
- 270 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011934 and software 370737.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | C 200cdi |
| Model year | 2004 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 89.7 kW (122 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011934 |
| ECU software | 370737 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2148 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 88,0 X 88,3 mm |
| OEM engine code | OM611 DE 22 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 270 Nm | — | — |
| Stage 1 | 170 HP | 370 Nm | +48 (39.3%) | +100 |
| Stage 2 | 179 HP | 385 Nm | +57 (46.7%) | +115 |
| Stage 3 | 188 HP | 419 Nm | +66 (54.1%) | +149 |
| Stage 4 | 220 HP | 500 Nm | +98 (80.3%) | +230 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 Mercedes-Benz C 200cdi Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281011934 and software version 370737. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011934 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB C 200CDI 2004 Turbodiesel 89.7KW with Bosch 0281011934 and software ID CR30-646-C5D7-203WA-90kW-EU3-ME-1104×013 (Bosch software number 370737 ( 1037370737 )). This original file corresponds to a factory engine output of approximately 89.7 kW (~122 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011934, CR30-646-C5D7-203WA-90kW-EU3-ME-1104×013, 370737 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
284780E9 E14E8CA6 CFCD102E BAD7BBA3 562CF1A5 3DC1E883 C7236051 42DBF6DB