Original file
Original / Factory · Diesel · 200 CDI 136hp
MB C 200CDI original file Delphi
Mercedes-Benz C 200CDI Original136 HP Factory calibration Stock backup file, 360 Nm, Diesel
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 200 CDI 136hp, OM651 DE 22 La red., 2.1L, Diesel. Engine #4707 in our gains database.
- Power
- 136 HPfactory calibration
- Torque
- 360 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware NMA9J.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | C 200cdi Kw |
| Factory power | 100 kW (136 HP) |
| ECU manufacturer | Delphi |
| ECU hardware | CRD-646-NMA9J-204SM-100KW-41OP-EF-ME-D55-0746×12 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2143 CC |
| Compression ratio | 16,2 : 1 |
| Bore × Stroke | 83,0 X 99,0 mm |
| OEM engine code | OM651 DE 22 La red. |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 136 HP | 360 Nm | — | — |
| Stage 1 | 190 HP | 460 Nm | +54 (39.7%) | +100 |
| Stage 2 | 200 HP | 478 Nm | +64 (47.1%) | +118 |
| Stage 3 | 210 HP | 558 Nm | +74 (54.4%) | +198 |
| Stage 4 | 245 HP | 666 Nm | +109 (80.1%) | +306 |
About this calibration file
This is the factory (original) ECU calibration for the Mercedes-Benz C 200cdi Kw, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Delphi ECU with hardware number CRD-646-NMA9J-204SM-100KW-41OP-EF-ME-D55-0746×12. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
CRD-646-NMA9J-204SM-100KW-41OP-EF-ME-D55-0746×12 (Delphi) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB C 200CDI KW with Delphi CRD-646-NMA9J-204SM-100kw-41OP-EF-ME-D55-0746×12. This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as CRD-646-NMA9J-204SM-100kw-41OP-EF-ME-D55-0746×12. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
03E7CE5C 070CE40D 19ED4444 2CE896ED 51FE1AD7 D4D20BEB 7C9F9DA0 AF5C6429