Mercedes-Benz E 200 D Diesel 69.9 kW (95 HP) temic
Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
- Factory hardware — no modifications required
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | E 200 |
| Model year | 1997 |
| Fuel / Induction | Diesel |
| Factory power | 69.9 kW (95 HP) |
| ECU hardware | 04010012 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1461 CC |
| Compression ratio | 15,1 : 1 |
| Bore × Stroke | 76,0 X 80,5 mm |
| OEM engine code | 160d 95hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 95 HP | 240 Nm | — | — |
| Stage 1 | 135 HP | 330 Nm | +40 (42.1%) | +90 |
| Stage 2 | 142 HP | 343 Nm | +47 (49.5%) | +103 |
| Stage 3 | 149 HP | 372 Nm | +54 (56.8%) | +132 |
| Stage 4 | 171 HP | 444 Nm | +76 (80%) | +204 |
About this calibration file
This is the factory (original) ECU calibration for the 1997 Mercedes-Benz E 200 Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a OEM ECU with hardware number 04010012. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
04010012 listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product Details
This product contains a complete original ECU backup (stock file) for MB E 200 D 1997 Diesel 69.9KW with temic 04010012. This original file corresponds to a factory engine output of approximately 69.9 kW (~95 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 04010012. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
EED3C140 D1EA9C09 E9FF0183 1DB6CA4E F82E3498 39DD1813 27EA7073 8FE6C0CC