Instant download
MB ML 320CDI Stage 2 file Bosch EDC16CP31 · SW 392227
2005 · Turbo diesel · 224 hp (165 kW)
Choose your file
Dyno sheet
- Power
- 275 hp +51
- Torque
- 600 Nm +90
Typical crank figures for a healthy 320 CDI. Results depend on the car's condition, fuel and parts.
- Power
- 224 hp 165 kW
- ECU
- Bosch EDC16CP31
- Engine
- 320 CDI Turbo diesel · 2,987 cc · 6 cyl
- File
- 2 MB BIN, ready to write
Bosch EDC16CP31 on the MB ML 320CDI
Software and hardware
- Software
- 392227 (1037392227) The software inside: your read must show this number
How the Bosch EDC16CP31 is read: OBD and Bench
Older tools
Built on request for the MB ML 320CDI
- DPF off
- EGR off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberssoftware 392227
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows software 392227 (1037392227), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 2 file is
This is a Stage 2 tune of the factory calibration of the 2005 MB ML 320CDI (165 kW, 224 hp), for its Bosch EDC16CP31 ECU with software 392227 (1037392227). Stage 2 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.
Stage 2 on the 320 CDI goes further than Stage 1 and expects supporting parts: a freer exhaust or downpipe, a bigger intercooler and a clutch rated for the torque. Fit them first; on a standard car a Stage 2 file asks more than the parts give.
The MB ML 320CDI carries the 320 CDI engine, 224 hp and 510 Nm from the factory. On this engine, Stage 1 usually gives about 254 hp and 580 Nm (+30 hp, +70 Nm); Stage 2 usually gives about 275 hp and 600 Nm (+51 hp, +90 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 392227 of the MB ML 320CDI we sell the original, Stage 1 and Stage 2, each made from the same original read. Every file downloads straight after payment.
The Bosch EDC16CP31 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and bFlash. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 392227 (1037392227) is the calibration inside the Bosch ECU.
Questions
Which ECU does this MB ML 320CDI Stage 2 file fit?
A Bosch EDC16CP31 ECU with software 392227 (1037392227). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC16CP31 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the MB ML 320CDI?
Usually about 254 hp and 580 Nm against 224 hp and 510 Nm stock (+30 hp, +70 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC16CP31 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
Stage 1 or Stage 2 on the MB ML 320CDI?
Stage 1, about 254 hp and 580 Nm, is for a standard car. Stage 2, about 275 hp and 600 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand