Original file
Original / Factory · Diesel · 208/308/408 CDI 82hp
MB Sprinter 2.2 CDI original file Bosch HW 0281010525 · SW 351400
Mercedes-Benz Sprinter 2.2 CDI Turbo Diesel 60.3 kW (82 HP) Original2001, Turbo diesel, 60.3 kW (82 hp)
82 HP Factory calibration Stock backup file, 200 Nm, Diesel
Calibrated ECU file for 0281010525 (SW 351400). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 208/308/408 CDI 82hp, OM611, 2.1L, Diesel. Engine #4951 in our gains database.
- Power
- 82 HPfactory calibration
- Torque
- 200 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010525 and software 351400.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Sprinter |
| Model year | 2001 |
| Displacement | 2.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 60.3 kW (82 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010525 |
| ECU software | 351400 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2148 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 88,0 X 83,0 mm |
| OEM engine code | OM611 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 82 HP | 200 Nm | — | — |
| Stage 1 | 98 HP | 244 Nm | +16 (19.5%) | +44 |
| Stage 2 | 103 HP | 254 Nm | +21 (25.6%) | +54 |
| Stage 3 | 123 HP | 310 Nm | +41 (50%) | +110 |
| Stage 4 | 148 HP | 370 Nm | +66 (80.5%) | +170 |
About this calibration file
This is the factory (original) ECU calibration for the 2001 Mercedes-Benz Sprinter 2.2L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281010525 and software version 351400. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010525 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB Sprinter 2.2 CDI 2001 Turbo-Diesel 60.3KW with Bosch 0281010525 (Bosch software number 351400 ( 1037351400 )). This original file corresponds to a factory engine output of approximately 60.3 kW (~82 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010525, 351400 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
D60C8C95 E90CBD6F 6AC8E7B7 F4E88C71 1856D79D 807A6821 35B671D4 8104E4F7