Instant download
MB Sprinter 2.2 CDI Stage 1 file Bosch EDC16C31 HW 0281014201 · SW 386794
2006 · Turbo diesel · 130 hp (96 kW)
Choose your file
Dyno sheet
- Power
- 190 hp +61
- Torque
- 420 Nm +115
Typical crank figures for a healthy 213/313/413/513 CDI. Results depend on the car's condition, fuel and parts.
- Power
- 130 hp 96 kW
- ECU
- Bosch EDC16C31
- Engine
- 213/313/413/513 CDI Turbo diesel · 2,148 cc · 4 cyl
- File
- 512 KB BIN, ready to write
Bosch EDC16C31 on the MB Sprinter 2.2 CDI
Software and hardware
- Hardware
- 0281014201 Bosch's number for the ECU itself, on its label printed 0 281 014 201
- Software
- 386794 (1037386794) The software inside: your read must show this number
How the Bosch EDC16C31 is read: OBD and Bench
Older tools
Built on request for the MB Sprinter 2.2 CDI
- DPF off
- EGR off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0281014201 and software 386794
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0281014201 and software 386794 (1037386794), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2006 MB Sprinter 2.2 CDI (96 kW, 130 hp), for its Bosch EDC16C31 ECU with hardware 0281014201 and software 386794 (1037386794). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 213/313/413/513 CDI raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.
The MB Sprinter 2.2 CDI carries the 213/313/413/513 CDI engine, 129 hp and 305 Nm from the factory. On this engine, Stage 1 usually gives about 190 hp and 420 Nm (+61 hp, +115 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 386794 of the MB Sprinter 2.2 CDI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch EDC16C31 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0281014201 is the number on the Bosch ECU's label. Software 386794 (1037386794) is the calibration inside it: a read with hardware 0281014201 and another software number needs a different file.
Questions
Which ECU does this MB Sprinter 2.2 CDI Stage 1 file fit?
A Bosch EDC16C31 ECU with hardware 0281014201 and software 386794 (1037386794). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC16C31 read and written?
Over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, Autotuner, MagicMotorsport FLEX and CMD Flash. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the MB Sprinter 2.2 CDI?
Usually about 190 hp and 420 Nm against 129 hp and 305 Nm stock (+61 hp, +115 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC16C31 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand