Stage 2
Stage 2 · Diesel · 1.7 CDI 90hp
MB Vaneo 1.7 CDI Stage 2 file Bosch HW 0281011149 · A 668 1530679 · SW 365031
Mercedes-Benz Vaneo 1.7 CDI Turbo Diesel 66.9 kW (91 HP) Stage 22004, Turbo diesel, 66.9 kW (91 hp)
90 → 126 HP +36 HP +59 Nm 40% more power
Calibrated ECU file for 0281011149 (SW 1530679). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.7 CDI 90hp, OM668 DE 17 LA, 1.7L, Diesel. Engine #4978 in our gains database.
- Power
- 126 HP+36 HP from 90
- Torque
- 239 Nm+59 Nm from 180
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011149 and software 365031.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vaneo |
| Model year | 2004 |
| Displacement | 1.7 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 66.9 kW (91 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011149 |
| ECU software | 1530679 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1689 CC |
| Compression ratio | 19,0 : 1 |
| Bore × Stroke | 80,0 X 84,0 mm |
| OEM engine code | OM668 DE 17 LA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 90 HP | 180 Nm | — | — |
| Stage 1 | 120 HP | 230 Nm | +30 (33.3%) | +50 |
| Stage 2 | 126 HP | 239 Nm | +36 (40%) | +59 |
| Stage 3 | 135 HP | 279 Nm | +45 (50%) | +99 |
| Stage 4 | 162 HP | 333 Nm | +72 (80%) | +153 |
About this calibration file
The Stage 2 calibration for the 2004 Mercedes-Benz Vaneo 1.7L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281011149 and software version 1530679. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 126 HP and 239 Nm at the crank — a gain of +36 HP (40%) and +59 Nm over the factory 90 HP / 180 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011149 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for MB Vaneo 1.7 CDI 2004 Turbodiesel 66.9KW with Bosch 0281011149 (Bosch software number 365031 ( 1037365031 )). The base stock vehicle for this calibration has a factory output of around 66.9 kW (~91 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011149, 365031 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
98A9F992 484DD72E B5905FD6 BFF24BE4 26F044FC 468782AE A7313F48 BCC1B3AB