Stage 1
Stage 1 · Diesel · 109 CDI 88hp
MB Vito 2.2 CDI Stage 1 file Bosch HW 0281011793 · SW 371300
Mercedes-Benz Vito 2.2 CDI Turbo Diesel 64.7 kW (88 HP) Stage 12004, Turbo diesel, 64.7 kW (88 hp)
88 → 106 HP +18 HP +48 Nm 20% more power
Calibrated ECU file for 0281011793 (SW 371300). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 109 CDI 88hp, OM646 DE 22 LA red., 2.1L, Diesel. Engine #4992 in our gains database.
- Power
- 106 HP+18 HP from 88
- Torque
- 268 Nm+48 Nm from 220
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011793 and software 371300.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito |
| Model year | 2004 |
| Displacement | 2.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 64.7 kW (88 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011793 |
| ECU software | 371300 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2143 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 88,0 X 88,3 mm |
| OEM engine code | OM646 DE 22 LA red. |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 88 HP | 220 Nm | — | — |
| Stage 1 | 106 HP | 268 Nm | +18 (20.5%) | +48 |
| Stage 2 | 111 HP | 279 Nm | +23 (26.1%) | +59 |
| Stage 3 | 132 HP | 341 Nm | +44 (50%) | +121 |
| Stage 4 | 158 HP | 407 Nm | +70 (79.5%) | +187 |
About this calibration file
The Stage 1 calibration for the 2004 Mercedes-Benz Vito 2.2L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281011793 and software version 371300. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 106 HP and 268 Nm at the crank — a gain of +18 HP (20%) and +48 Nm over the factory 88 HP / 220 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011793 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for MB Vito 2.2 CDI 2004 Turbodiesel 64.7KW with Bosch 0281011793 (Bosch software number 371300 ( 1037371300 )). The base stock vehicle for this calibration has a factory output of around 64.7 kW (~88 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011793, 371300 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
24B9D008 B6926BFB 3B0D3AA1 A6717735 520C0C35 FE791E1C 356B900A 8DC213BA