Original file
Original / Factory · Diesel · 112 CDI 122hp
MB Vito 220 CDI original file Bosch · SW 351118
Mercedes-Benz Vito 220 CDI 89.7 kW (122 HP) Original2004, 89.7 kW (122 hp)
122 HP Factory calibration Stock backup file, 300 Nm, Diesel
Calibrated ECU file for (SW 351118). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 112 CDI 122hp, OM611.980, 2.2L, Diesel. Engine #4991 in our gains database.
- Power
- 122 HPfactory calibration
- Torque
- 300 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Bosch and software 351118.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito 220 |
| Model year | 2004 |
| Fuel / Induction | CDI (Turbo Diesel) |
| Factory power | 89.7 kW (122 HP) |
| ECU manufacturer | Bosch |
| ECU software | 351118 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2151 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 88,0 X 88,4 mm |
| OEM engine code | OM611.980 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 300 Nm | — | — |
| Stage 1 | 146 HP | 366 Nm | +24 (19.7%) | +66 |
| Stage 2 | 153 HP | 381 Nm | +31 (25.4%) | +81 |
| Stage 3 | 183 HP | 465 Nm | +61 (50%) | +165 |
| Stage 4 | 220 HP | 555 Nm | +98 (80.3%) | +255 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 Mercedes-Benz Vito 220 CDI (Turbo Diesel), extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 351118. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for MB Vito 220 CDI 2004 89.7KW with Bosch Bosch (Bosch software number 351118 ( 1037351118 )). This original file corresponds to a factory engine output of approximately 89.7 kW (~122 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Bosch, 351118 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
5023DDEC 05EB965B 730DC610 BBF59596 34F3908A 9B87BD0A B6F27DDB F7CD895A