Original file
Original / Factory · Diesel · 120 CDI V6 204hp
MB Vito 300 CDI original file Bosch · SW 393814
Mercedes-Benz Vito 300 CDI Turbo Diesel 150 kW (204 HP) Original2004, Turbo diesel, 150 kW (204 hp)
204 HP Factory calibration Stock backup file, 440 Nm, Diesel
Calibrated ECU file for (SW 393814). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 120 CDI V6 204hp, OM642, 3L, Diesel. Engine #4994 in our gains database.
- Power
- 204 HPfactory calibration
- Torque
- 440 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Bosch and software 393814.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito 300 |
| Model year | 2004 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 150 kW (204 HP) |
| ECU manufacturer | Bosch |
| ECU software | 393814 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2987 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 83,0 X 92,0 mm |
| OEM engine code | OM642 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 204 HP | 440 Nm | — | — |
| Stage 1 | 240 HP | 560 Nm | +36 (17.6%) | +120 |
| Stage 2 | 318 HP | 647 Nm | +114 (55.9%) | +207 |
| Stage 3 | 334 HP | 682 Nm | +130 (63.7%) | +242 |
| Stage 4 | 367 HP | 814 Nm | +163 (79.9%) | +374 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 Mercedes-Benz Vito 300 Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 393814. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for MB Vito 300 CDI 2004 Turbodiesel 150KW with Bosch Bosch (Bosch software number 393814 ( 1037393814 )). This original file corresponds to a factory engine output of approximately 150 kW (~204 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Bosch, 393814 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E69C86C3 156E1F63 BE3D68C0 54852201 85F00430 3B592DE7 37DE1F51 89D0DBF2