Stage 1
Stage 1 · Diesel · 120 CDI V6 204hp
MB Vito 300 TD Stage 1 file Bosch · SW 383394
Mercedes-Benz Vito 300 TD Turbo Diesel 150 kW (204 HP) Stage 12007, Turbo diesel, 150 kW (204 hp)
204 → 240 HP +36 HP +120 Nm 18% more power
Calibrated ECU file for (SW 383394). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 120 CDI V6 204hp, OM642, 3L, Diesel. Engine #4994 in our gains database.
- Power
- 240 HP+36 HP from 204
- Torque
- 560 Nm+120 Nm from 440
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Bosch and software 383394.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito 300 Td |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 150 kW (204 HP) |
| ECU manufacturer | Bosch |
| ECU software | 383394 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2987 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 83,0 X 92,0 mm |
| OEM engine code | OM642 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 204 HP | 440 Nm | — | — |
| Stage 1 | 240 HP | 560 Nm | +36 (17.6%) | +120 |
| Stage 2 | 318 HP | 647 Nm | +114 (55.9%) | +207 |
| Stage 3 | 334 HP | 682 Nm | +130 (63.7%) | +242 |
| Stage 4 | 367 HP | 814 Nm | +163 (79.9%) | +374 |
About this calibration file
The Stage 1 calibration for the 2007 Mercedes-Benz Vito 300 Td Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 383394. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 240 HP and 560 Nm at the crank — a gain of +36 HP (18%) and +120 Nm over the factory 204 HP / 440 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for MB Vito 300 TD 2007 Turbodiesel 150KW with Bosch Bosch (Bosch software number 383394 ( 1037383394 )). The base stock vehicle for this calibration has a factory output of around 150 kW (~204 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Bosch, 383394 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
95795C07 DE574155 D8DFF017 B90E1E53 B203A4DB A6DBFD47 C0EED237 A2621B45