Stage 1
Stage 1 · Diesel · 2.0 DiD 136hp
Mitsubishi Grandis 2.0 CRDi Stage 1 file Bosch HW 0281012535 · SW 379997
Stage 12007, Turbo diesel, 100 kW (136 hp)
136 → 170 HP +34 HP +90 Nm 25% more power
Calibrated ECU file for 0281012535 (SW 379997). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 DiD 136hp, BSY/BSL, 2L, Diesel. Engine #5277 in our gains database.
- Power
- 170 HP+34 HP from 136
- Torque
- 400 Nm+90 Nm from 310
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Grandis and software 379997.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mitsubishi |
|---|---|
| Vehicle model | Grandis |
| Model year | 2007 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 100 kW (136 HP) |
| ECU manufacturer | Mitsubishi |
| ECU hardware | 0281012535 |
| ECU software | 379997 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1968 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | BSY/BSL |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 136 HP | 310 Nm | — | — |
| Stage 1 | 170 HP | 400 Nm | +34 (25%) | +90 |
| Stage 2 | 195 HP | 420 Nm | +59 (43.4%) | +110 |
| Stage 3 | 205 HP | 481 Nm | +69 (50.7%) | +171 |
| Stage 4 | 245 HP | 574 Nm | +109 (80.1%) | +264 |
About this calibration file
The Stage 1 calibration for the 2007 Mitsubishi Grandis 2.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Mitsubishi ECU with hardware number 0281012535 and software version 379997. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 170 HP and 400 Nm at the crank — a gain of +34 HP (25%) and +90 Nm over the factory 136 HP / 310 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281012535 (Mitsubishi) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Mitsubishi Grandis 2.0 CRDi 2007 Turbodiesel 100KW Bosch 0281012535 Bosch 379997 with Mitsubishi Grandis and software ID 100KW (Bosch software number 379997 ( 1037379997 )). The base stock vehicle for this calibration has a factory output of around 100 kW (~136 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Grandis, 100KW, 379997 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
25B21E41 E65DA825 318D565F A4B42F60 A7432F7D F38124A1 4AE22A73 4F89E9F8