Stage 1 file Instant download
Nissan Juke 1.5 DCI Stage 1 file Siemens · 37011KB72A37011KB0
2011, Turbo diesel, 80.9 kW (110 hp)
Stock 110 hp → Stage 1 135 hp +25 hp +70 Nm
This is a Stage 1 tune of the factory calibration of the 2011 Nissan Juke 1.5 DCI (80.9 kW, 110 hp), for its Siemens ECU with software ID 37011KB72A37011KB0 and ECU number 0755RBJ91B. Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Check your read
Not sure it fits? Drop your read here and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
Every file for this software
The original and the tunes we sell for this calibration, each made from the same read.
| File | Price | Buy |
|---|---|---|
| Original | £6.99 | Add to cart |
| Stage 1 this page | £21.99 | Add to cart |
Power and torque
1.5 DCi (D559861), diesel
| Power | Torque | Gain | |
|---|---|---|---|
| Stock | 110 hp | 240 Nm | Factory |
| Stage 1 | 135 hp | 310 Nm | +25 hp, +70 Nm |
Typical crank figures for a healthy 1.5 DCi (D559861), shown only for the files on sale here. Results depend on the car's condition, fuel and parts.
About this file
Stage 1 on the 1.5 DCi (D559861) raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.
The Nissan Juke 1.5 DCI carries the 1.5 DCi (D559861) engine, 110 hp and 240 Nm from the factory. On this engine, Stage 1 usually gives about 135 hp and 310 Nm (+25 hp, +70 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For this calibration of the Nissan Juke 1.5 DCI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Siemens ECU in this car is read and written over OBD and on the bench, with tools such as Alientech Kess V2, Autotuner, CMD Flash, MagicMotorsport FLEX, Alientech KESS3 and Dimsport New Genius. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off and swirl flaps off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software ID 37011KB72A37011KB0 names that calibration in your tool's read. ECU number 0755RBJ91B is how this Siemens ECU identifies itself.
How the Siemens ECU is read
OBD Bench
Read and written with Alientech Kess V2, Autotuner, CMD Flash, MagicMotorsport FLEX, Alientech KESS3 and Dimsport New Genius.
- Read the ECU and keep the read: it is your way back.
- Match the numbers: software ID 37011KB72A37011KB0 and ECU number 0755RBJ91B.
- Pay and download: the file is in your account straight away.
- Write it back the way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows software ID 37011KB72A37011KB0 and ECU number 0755RBJ91B, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
Questions
Which ECU does this Nissan Juke 1.5 DCI Stage 1 file fit?
A Siemens ECU with software ID 37011KB72A37011KB0 and ECU number 0755RBJ91B. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Siemens ECU read and written?
Over OBD and on the bench, with tools such as Alientech Kess V2, Autotuner, CMD Flash, MagicMotorsport FLEX and Alientech KESS3. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Nissan Juke 1.5 DCI?
Usually about 135 hp and 310 Nm against 110 hp and 240 Nm stock (+25 hp, +70 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Siemens ECU file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off and swirl flaps off. Send your read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.