Stage 2
Stage 2 · Petrol · 1.6i 16v 100hp
Opel Astra-G 1.6 16V Z16XE Stage 2 file Delco DBKL
Opel Astra-G 1.6 16V Z16XE Petrol 74.3 kW (101 HP) Delco DBKL Delco DBKL Stage 22000, Petrol, 74.3 kW (101 hp)
100 → 117 HP +17 HP +23 Nm 17% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6i 16v 100hp, X16XEL, 1.6L, Petrol. Engine #5551 in our gains database.
- Power
- 117 HP+17 HP from 100
- Torque
- 173 Nm+23 Nm from 150
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware DBKL.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Petrol.
Hardware
- Sport / decat downpipe (or sports-cat)
- High-flow air intake
- Optional: front-mount intercooler upgrade for sustained boost
Software / calibration
- Cat-warm-up & secondary lambda re-mapped for decat hardware
- Boost target raised in line with cooling capacity
- Knock / ignition advance re-trimmed
- Idle and load-transition tables refined
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Astra |
| Model year | 2000 |
| Displacement | 1.6 L |
| Fuel / Induction | Petrol |
| Factory power | 74.3 kW (101 HP) |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1598 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 79,0 X 81,5 mm |
| OEM engine code | X16XEL |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 100 HP | 150 Nm | — | — |
| Stage 1 | 110 HP | 165 Nm | +10 (10%) | +15 |
| Stage 2 | 117 HP | 173 Nm | +17 (17%) | +23 |
| Stage 3 | 165 HP | 233 Nm | +65 (65%) | +83 |
| Stage 4 | 195 HP | 278 Nm | +95 (95%) | +128 |
About this calibration file
The Stage 2 calibration for the 2000 Opel Astra 1.6L Petrol is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 117 HP and 173 Nm at the crank — a gain of +17 HP (17%) and +23 Nm over the factory 100 HP / 150 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Opel Astra-G 1.6 16V Z16XE 2000 Benzin 74.3KW with Delco DBKL. The base stock vehicle for this calibration has a factory output of around 74.3 kW (~101 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as DBKL. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
632E5D55 FDF030F5 708822F4 A78D22A3 966F922A 5F0F630B 9D996C80 F54CBF77