Original file
Original / Factory · Petrol · 1.8i 16v 115hp
Opel Astra-G 1.8 L original file Siemens · SW 071082
Opel Astra-G 1.8 L Petrol 84.6 kW (115 HP) Original1998, Petrol, 84.6 kW (115 hp)
115 HP Factory calibration Stock backup file, 170 Nm, Petrol
Calibrated ECU file for (SW 071082). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.8i 16v 115hp, X18XE1, 1.8L, Petrol. Engine #5553 in our gains database.
- Power
- 115 HPfactory calibration
- Torque
- 170 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 90560476 and software 071082.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Astra |
| Model year | 1998 |
| Displacement | 1.8 L |
| Fuel / Induction | Petrol |
| Factory power | 84.6 kW (115 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 90560476 |
| ECU software | 071082 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1796 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 80,5 X 88,2 mm |
| OEM engine code | X18XE1 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 170 Nm | — | — |
| Stage 1 | 125 HP | 185 Nm | +10 (8.7%) | +15 |
| Stage 2 | 133 HP | 194 Nm | +18 (15.7%) | +24 |
| Stage 3 | 190 HP | 264 Nm | +75 (65.2%) | +94 |
| Stage 4 | 224 HP | 315 Nm | +109 (94.8%) | +145 |
About this calibration file
This is the factory (original) ECU calibration for the 1998 Opel Astra 1.8L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number 90560476 and software version 071082. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
90560476 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Opel Astra-G 1.8 L 1998 Benzin 84.6KW with Siemens 90560476 (Bosch software number 071082 ( 1037071082 )). This original file corresponds to a factory engine output of approximately 84.6 kW (~115 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 90560476, 071082 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
07427E86 A4C9E01D E7B33F4F D2214B9E 4C4B1C8A D43C509F 429158E8 CC0056A8