Stage 2
Stage 2 · Diesel · 2.2 DTI 125hp
Opel Astra-G 1.9 CDTi Stage 2 file Bosch HW 0281011667 · SW 371868
Opel Astra-G 1.9 CDTi Turbo Diesel 88.3 kW (120 HP) Stage 2Turbo diesel, 88.3 kW (120 hp)
125 → 158 HP +33 HP +53 Nm 26% more power
Calibrated ECU file for 0281011667 (SW 371868). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.2 DTI 125hp, Y22DTR, 2.2L, Diesel. Engine #5559 in our gains database.
- Power
- 158 HP+33 HP from 125
- Torque
- 333 Nm+53 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011667 and software 371868.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Astra |
| Displacement | 1.9 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 88.3 kW (120 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011667 |
| ECU software | 371868 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 2172 CC |
| Compression ratio | 18,5 : 1 |
| Bore × Stroke | 84,0 X 98,0 mm |
| OEM engine code | Y22DTR |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 125 HP | 280 Nm | — | — |
| Stage 1 | 150 HP | 320 Nm | +25 (20%) | +40 |
| Stage 2 | 158 HP | 333 Nm | +33 (26.4%) | +53 |
| Stage 3 | 188 HP | 434 Nm | +63 (50.4%) | +154 |
| Stage 4 | 225 HP | 518 Nm | +100 (80%) | +238 |
About this calibration file
The Stage 2 calibration for the Opel Astra 1.9L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281011667 and software version 371868. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 158 HP and 333 Nm at the crank — a gain of +33 HP (26%) and +53 Nm over the factory 125 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011667 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for Opel Astra-G 1.9 CDTi Turbodiesel 88.3KW with Bosch 0281011667 (Bosch software number 371868 ( 1037371868 )). The base stock vehicle for this calibration has a factory output of around 88.3 kW (~120 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011667, 371868 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
723FCC76 B06379FF 7314D9AC 1AF3CBFE 505B8D62 50DDB235 9DC9EB44 E9965DE7